Liberty II Model # 44215 Wooden Swing Set Owner's Manual & Assembly Instructions MANUFACTURED BY: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 800-856-4445 average 2 person assembly time assembly time may vary based on skill level For the most up to date assembly manual, to register your set, or to order replacement parts please visit www.backyarddiscovery.com SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT YOU NEED TO ORDER REPLACEMENT PARTS.
* With Go Configure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.backyarddiscovery.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La enda donde realizó la compra no almacena piezas de este producto.
Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The play center is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3. Place the equipment not less than 6 ft (1.
The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.52m) 9' (2.74m) 5' (1.
18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment. Treat your playset with stain regularly, to help prevent severe checking/splitting and other weather damage.
APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9 X3.
This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1- 800-6382772.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 28'-8 1/2" Safe Play Zone 13'-11 3/4" 25'-11 3/4" 6'-0" 16'-8 1/2" 6'-0" General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs.
Parts Identification Wood Components (NOT TO SCALE) (1) A50 - SWING BEAM - W4L11733 3 3/8"x5 1/4"x89 1/2" (86x134x2274) (1) B1 - PORCH UPRIGHT - W4L05691 3"x3"x89 1/2" (76x76x2274) B2 - PORCH UPRIGHT - W4L05692 3"x3"x89 1/2" (76x76x2274) (1) B4 - FORT UPRIGHT - W4L05684 (2) 3"x3"x59" (76.0x76.0x1500.0) B5 - LOWER UPRIGHT - W100998 3"x3"x59" (76.0x76.0x1500.0) (1) B6 - FORT UPRIGHT - W4L05686 (1) 3"x3"x59" (76.0x76.0x1500.0) (1) B7 - LOWER UPRIGHT - W101033 3"x3"x59" (76.0x76.0x1500.
Parts Identification Wood Components (NOT TO SCALE) (2) G1 - FORT RAIL - W4L05694 1"x5 1/4"x47 1/8" (24x134x1198) G3 - GROUND BOARD - W4L05651 (2) 1"x5 1/4"x88 7/8" (24.0x134.0x2256.0) G4 - FLOOR SUPPORT - W4L05673 1"x5 1/4"x55 7/8" (24.0x134.0x1418.0) (2) (4) G5 - BAY WINDOW HEADER - W101040 1"x5 1/4"x49 3/8" (24.0x134.0x1254.0) (1) G6 - SWING BEAM SUPPORT - W101015 1"x5 1/4"x47 1/8" (24.0x134.0x1198.0) (1) (2) G8 - GROUND BOARD - W101000 1"x5 1/4"x47 1/8" (24.0x134.0x1198.
Parts Identification Wood Components (NOT TO SCALE) H3 - RAFTER BOARD - W4L05675 (1) 0.945 in"x3 3/8"x30"(24x86x762) (2) H4 - PICNIC TABLE / SEAT - W101060 1"x3 3/8"x49" (24.0x86.0x1246.0) (2) H5 - FLOOR SUPPORT - W101038 1"x3 3/8"x47 1/8"" (24.0x86.0x1198.0) H6 - FLOOR SUPPORT - W101036 1"x3 3/8"x38 7/8" (24.0x86.0x986.0) (2) H7 - RAFTER BOARD - W4L05680 1"x3 3/8"x30"(24x86x762) (1) (2) H8 - PICNIC TABLE SEAT SUPPORT - W101056 1"x3 3/8"x22 7/8" (24.0x86.0x580.
Parts Identification Wood Components (NOT TO SCALE) (6) K1 - ARCHED WALL RAIL - W4L05665 5/8"x5 1/4"x88 1/2" (16.0x134.0x2248.0) (1) (1) J1 - FLOOR SUPPORT - W101037 1"x2 3/8"x3" (24x60x76) K2 - WALL RAIL SINGLE ARCH - W4L05659 5/8"x5 1/4"x88 1/2" (16.0x134.0x2248.0) (1) K3 - CENTER WALL BOARD - W101027 5/8"x5 1/4"x52" (16.0x134.0x1320.0) (2) K4 - PICNIC TABLE BOARD - W101059 5/8"x5 1/4"x49" (16.0x134.0x1246.0) K5 - WALL BOARD - W101063 (1) 5/8"x5 1/4"x47 1/8" (16.0x134.0x1198.
Parts Identification Wood Components (NOT TO SCALE) (4) M3 - CABIN WALL SLAT - W101022 5/8"x3 1/2"x52" (16.0x86.0x1320.0) (2) M4 - WALL BOARD - W101029 5/8"x3 3/8"x52" (16.0x86.0x1320.0) (2) M5 - GABLE BOARD - W101051 5/8"x3 3/8"x50 3/8" (16.0x86.0x1280.0) M6 - FLOOR BOARD - W101007 (9) 5/8"x3 3/8"x49" (16.0x86.0x1246.0) (6) M7 - WALL RAIL - W101019 5/8"x3 3/8"x47 1/8" (16.0x86.0x1198.0) (2) M8 - GABLE BOARD - W101052 5/8"x3 3/8"x43 3/4" (16.0x86.0x1110.
Parts Identification Wood Components (NOT TO SCALE) (2) M17 - CABIN WALL SLAT - W4L05661 5/8"x3 1/2"x52" (16.0x86.0x1320.0) (2) M18 - WALL RAIL - W4L05667 5/8"x3 3/8"x13 7/8" (16.0x86.0x354.0) (4) M19 - WALL RAIL - W4L05654 5/8"x3 3/8"x47 3/4" (16.0x86.0x1214.0) (2) M20 - ROOF RAIL - W4L05670 5/8"x3 3/8"x56 7/8" (16.0x86.0x1446.
Parts Identification Wood Components (NOT TO SCALE) N3 - WALL BOARD - W101030 (10) 5/8"x2 3/8"x34 1/8" (16.0x60.0x868.0) N4 - SUNBURST CROSS SPOKE - W101047 5/8"x2 3/8"x29 1/2" (16.0x60.0x750.0) (1) (2) N5 - WALL BOARD - W101026 5/8"x2 3/8"x26 1/8" (16.0x60.0x664.0) N7 - SUNBURST VERTICAL SPOKE - W101049 5/8"x2 3/8"x13 1/2" (16.0x60.0x342.0) (1) N8 - SUNBURST ANGLED SPOKE - W101050 5/8"x2 3/8"x7 7/8" (16.0x60.0x200.
Parts Identification Wood Components (NOT TO SCALE) (2) Y1 - OUTER FLOOR BOARD - W4L05658 5/8"x3 3/4"x84 7/8" (16x96x2156) (1) Y2 - OUTER FLOOR BOARD - W101034 5/8"x4"x41 1/8" (16.0x102.0x1046.0) (1) Y3 - PICNIC TABLE BOARD - W101062 5/8"x4"x41 1/8" (16.0x102.0x1044.
Parts Identification Hardware (11) (4) (18) (13) (2) (6) (30) - BOLT WH 5/16x1 1/2 - H100010 (14) - BOLT WH 5/16x1/2 - H100115 (12) - BOLT WH 5/16x3/4 - H100222 (4) - BOLT WH 5/16x1 1/4 - H100009 - BOLT WH 5/16x1 3/4 - H100011 - BOLT WH 5/16x2 - H100012 - BOLT WH 5/16x2 1/4 - H100013 (91) - SCREW PFH 8x2 1/2 - H100090 (35) - SCREW PFH 8x2 1/4 - H100091 (30) - SCREW PFH 8x2 - H100111 (40) - SCREW PFH 8x1-3/4" - H100089 - BOLT WH 5/16x2 1/2 - H100014 - BOLT WH 5/16x3 - H100016 - BO
Parts Identification Hardware (26) BA - BOLT PTH 1/4x3/4 - H100063 (20) CD - WASHER FLAT 8x27 - H100105 (20) D - NUT BARREL WH 5/16x7/8 - H100005 (26) CG - WASHER LOCK INT 8x15 - H100108 (11) C - NUT BARREL WH 5/16x1 1/2 - H100006 (9) CF - WASHER LOCK INT 10x18 - H100107 (4) Y - LAG SCREW WH 5/16x1 1/2 - H100026 (16) AD - WASHER LOCK EXT 12x19 - H100031 (66) Z - LAG SCREW WH 5/16x2 - H100027 (195) AC - WASHER LOCK EXT 8x19 - H100030 (9) AA - LAG SCREW WH 5/16x2 1/2 - H100028 (7) BX - WASHER SPLIT 5/1
Parts Identification Hardware (4) LC - LAG SCREW WH 1/4x1-1/2 - H100145 (9) BL - SCREW TAPPING 14x3/4 - H100083 - T-40 TORX BIT - A100042 (2) - T-30 TORX BIT - H100147 (2) (2) (15) CY - SCREW PWH 8x5/8 - H100128 (2) (9) CE - WASHER FLAT 9x18 - H100106 (9) CA - WASHER FLAT 11x25 - H100102 (9) BF - T-NUT 3/8 - H100073 (120) BG - T-NUT 5/16 - H100074 (26) BE - T-NUT 1/4 - H100072 (4) BY - SWING HANGER QUICK LINK - H100097 25 - T-40 TORX WRENCH - A100041 - T-30 TORX WRENCH - H100114 (9) CH - S
Parts Identification Accessories (NOT TO SCALE) (4) EY - TUBING CAP GLIDER SUPPORT - A100067 (2) EW - GLIDER SUPPORT BYD GREEN - A100065 (4) EX - GLIDER BUSHING BYD GREEN - A100066 (2) GD - L BRACKET 66x66x127 - A100140 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 (8) TZ - L BRACKET 2.
Parts Identification Accessories (NOT TO SCALE) (1) DX - SLIDE BED 10' LIGHT GREEN - A100035 (2) DJ - GLIDER ARM LIGHT GREEN - A100021 (2) JV - HAND GRIP GREEN 816 c/c - A100134 (1) DN - GLIDER SEAT DARK GREEN - A100025 (4) FX - HAND GRIP METAL GREEN 381 c/c - A100118 (1) DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032 (2) EB - WINDOW FRAME GREEN 343x444.5 - A100044 (4) DW - SLIDE SUPPORT TUBE 21.
Parts Identification Accessories (NOT TO SCALE) (1) (2) - GREEN HC ROCK #1 - A6P00036 - GREEN HC ROCK #2 - A6P00037 (1) (2) - RED HC ROCK #1 - A6P00038 (1) - BLUE HC ROCK #2 - A6P00040 (2) - BLUE HC ROCK #1 - A6P00041 (1) - YELLOW HC ROCK #1 - A6P00042 (2) - RED HC ROCK #2 - A6P00039 (1) SQ - "A" REVISION TAG - A100314 28 - YELLOW HC ROCK #2 - A6P00043
(1) H77 - LEFT UPRIGHT - W100972 1"x3 3/8"x64 3/8" (24x86x1634) (5) H76 - LADDER RUNG - W100611 1"x3 3/8"x18 1/8" (24x86x460) 5 FOOT LADDER ASSEMBLY STEP 1 (10) SCREW PFH 8x2 H76 H77 29 SCREW PFH 8x2
(1) H78 - RIGHT UPRIGHT - W100973 1"x3 3/8"x64 3/8" (24x86x1634) 5 FOOT LADDER ASSEMBLY STEP 2 (10) SCREW PFH 8x2 H78 30 SCREW PFH 8x2
(1) M73 - REAR SUPPORT - W100610 5/8"x3 3/8"x19 1/4" (16x86x488) (1) M107 - ATTACHMENT BOARD - W103559 5/8"x3 3/8"x19 1/4" (16x86x488) 5 FOOT LADDER ASSEMBLY STEP 3 M107 (8) SCREW PFH 8x2 SCREW PFH 8x2 M73 FLUSH 1 1/4 31
(2) JV - HAND GRIP GREEN 816 c/c - A100134 5 FOOT LADDER ASSEMBLY STEP 4 LAG SCREW WH 1/4x1-1/2 (4) JV 32 LAG SCREW WH 1/4x1-1/2
(1) E72 - LEFT RAIL - W100036 1 3/8"x3 3/8"x61 3/4" (36x86x1570) M74 - ROCK WALL BOARD - W100987 (10) 5/8"x3 3/8"x26 5/8" (16x86x675) (1) E73 - RIGHT RAIL - W100037 1 3/8"x3 3/8"x61 3/4" (36x86x1570) M75 - ROCK WALL BOARD - W4L05240 5/8"x3 3/8"x26 5/8" (16x86x675) (4) (4) M76 - ROCK WALL BOARD - W4L05239 5/8"x3 3/8"x26 5/8" (16x86x675) ROCK WALL ASSEMBLY STEP 1 M74 M74 M76 M75 SCREW PFH 8x1 1/2 (72 PLCS) (72) SCREW PFH 8x1 1/2 M75 M74 M76 M74 M75 M74 M76 M74 M75 M74 M76 M74 M74 M74 E7
(1) M108 - TOP BOARD - W103105 5/8"x3 3/8"x27 7/8" (16x86x707) ROCK WALL ASSEMBLY STEP 2 SCREW PFH 8x1 1/2 (2 PLCS) (2) M108 34 SCREW PFH 8x1 1/2
(1) M102 - ATTACHMENT BOARD - W4L05242 5/8"x3 3/8"x27 7/8" (16x86x707) ROCK WALL ASSEMBLY STEP 3 SCREW PFH 8x1 1/2 (4 PLCS) (4) SCREW PFH 8x1 1/2 (2) T-NUT 5/16 T-NUT 5/16 (2 PLCS) M102 35
ROCK WALL ASSEMBLY STEP 4 (24) T-NUT 1/4 (24 PLCS) 36 T-NUT 1/4
(1) (1) (2) (1) - GREEN HC ROCK #1 - A6P00036 (1) - RED HC ROCK #1 - A6P00038 (2) - GREEN HC ROCK #2 - A6P00037 (2) - YELLOW HC ROCK #1 - A6P00042 - YELLOW HC ROCK #2 - A6P00043 (2) - RED HC ROCK #2 - A6P00039 - BLUE HC ROCK #2 - A6P00040 - BLUE HC ROCK #1 - A6P00041 ROCK WALL ASSEMBLY STEP 5 BOLT PTH 1/4x3/4 (24 PLCS) (24) BOLT PTH 1/4x3/4 (24) WASHER LOCK INT 8x15 WASHER LOCK INT 8x15 (24 PLCS) 37
(1) A50 - SWING BEAM - W4L11733 3 3/8"x5 1/4"x89 1/2" (86x134x2274) (1) - SWING BEAM EXTENSION BRACKET-LEFT - A100325 (1) (2) - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 - L BRACKET 66x66x127 - A100140 SWING BEAM ASSEMBLY STEP 1 (3) (2) BOLT HEX 5/16x4 1/4 (2) (2) (4) WASHER SPLIT 5/16 (2 PLCS) WASHER FLAT 8x27 WASHER FLAT 8x27 (4 PLCS) NUT LOCK 5/16 (2 PLCS) NUT BARREL WH 5/16x7/8 (3 PLCS) L BRACKET 66x66x127 (2 PLCS) A50 BOLT WH 5/16x3 (3 PLCS) SWING BEAM EXTENSION BRACKET-LEFT (1 PLC)
SP50 - SWING BEAM SUPPORT - W102417 3 3/8"x3 3/8"x49 3/8" (86x86x1254) (1) (1) (2) E51 - ANGLE BRACE - W100948 1 3/8"x3 3/8"x88 3/4" (36x86x2254) (1) G50 - GROUND BOARD - W100947 1"x5 1/4"x86 3/4" (24x134x2202) E50 - END SUPPORT - W100949 1 3/8"x3 3/8"x44 1/8" (36x86x1120) SWING BEAM ASSEMBLY STEP 2 (4) BOLT WH 5/16x2 SP50 WASHER LOCK EXT 8x19 (1 PLC) WASHER LOCK EXT 12x19 (1 PLC) (1) BOLT WH 5/16X6 (1 PLC) NUT BARREL WH 5/16x7/8 (1 PLC) BOLT WH 5/16X6 (2) E51 (2) BOLT WH 5/16x2 1/2 (9)
SWING BEAM ASSEMBLY STEP 3 NUT BARREL WH 5/16x7/8 (2 PLCS) (2) (2) BOLT WH 5/16x3 (2 PLCS) 40 BOLT WH 5/16x3 NUT BARREL WH 5/16x7/8
(4) SWING HANGER - A4M00505 SWING BEAM ASSEMBLY STEP 4 WASHER LOCK INT 10x18 (8) (8) T-NUT 3/8 (8 PLCS) (8) BOLT HEX 3/8x5 3/4 (8) SWING HANGER (4 PLCS) WASHER FLAT 11x25 (8 PLCS) WASHER LOCK INT 10x18 (8 PLCS) BOLT HEX 3/8x5 3/4 (8 PLCS) 41 WASHER FLAT 11x25 T-NUT 3/8
(4) BY - SWING HANGER QUICK LINK - H100097 (4) EY - TUBING CAP GLIDER SUPPORT - A100067 (2) EW - GLIDER SUPPORT BYD GREEN - A100065 (4) EX - GLIDER BUSHING BYD GREEN - A100066 SWING BEAM ASSEMBLY STEP 5 NUT LOCK 5/16 (4 PLCS) (4) TUBING CAP GLIDER SUPPORT (4 PLCS) WASHER FLAT 8x27 (4 PLCS) BOLT WH 5/16x5 3/4 (4 PLCS) GLIDER SUPPORT BYD GREEN (2 PLCS) GLIDER BUSHING BYD GREEN (4 PLCS) SWING HANGER QUICK LINK (4 PLCS) WASHER FLAT 8x27 (4 PLCS) NUT LOCK 5/16 (4 PLCS) 42 BOLT WH 5/16x5 3/4 (8) NUT
(1) (1) DX - SLIDE BED 10' LIGHT GREEN - A100035 STEP 1 M70 - SLIDE BED SUPPORT - W100935 5/8"x3 3/8"x19 7/8" (16x86x505) 10 FOOT SLIDE ASSEMBLY (3) BOLT WH 5/16x1/2 TOP (3) T-NUT 5/16 DX - SLIDE BED 10' LIGHT GREEN (SEE SLIDE ASSEMBLY INSTALLATION STEP FOR DECK MOUNTING HOLE DRILLING LOCATIONS). BOLT WH 5/16x1/2 (3 PLCS) T-NUT 5/16 (3 PLCS) M70 BOTTOM USE M70 SLIDE BED SUPPORT AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED.
(1) DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031 (1) TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033 (1) DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030 (1) DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032 10 FOOT SLIDE ASSEMBLY STEP 2 ● REPEAT ON OTHER SIDE, MAKING A LEFT AND RIGHT ASSEMBLY.
(4) DW - SLIDE SUPPORT TUBE 21.34x505 - A100034 21.34 OD x 2.77 W x 505 10 FOOT SLIDE ASSEMBLY STEP 3 ● PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY. ● INSTALL THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 2).
10 FOOT SLIDE ASSEMBLY STEP 4 ONCE THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD ARE COMPLETELY IN THE CAVITY AND SUPPORT POCKET, SECURE USING 2-1/2" SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN. REPEAT PROCESS FOR OPPOSITE SLIDE RAIL.
(1) B1 - PORCH UPRIGHT - W4L05691 3"x3"x89 1/2" (76x76x2274) (1) (1) (1) G3 - GROUND BOARD - W4L05651 1"x5 1/4"x88 7/8" (24.0x134.0x2256.0) B5 - LOWER UPRIGHT - W100998 3"x3"x59" (76.0x76.0x1500.0) (1) E1 - CENTER UPRIGHT - W4L05650 3 3/8"x1 3/8"x59" (86x36.0x1500.
B2 - PORCH UPRIGHT - W4L05692 3"x3"x89 1/2" (76x76x2274) (1) (1) (1) (1) G3 - GROUND BOARD - W4L05651 1"x5 1/4"x88 7/8" (24.0x134.0x2256.0) B7 - LOWER UPRIGHT - W101033 3"x3"x59" (76.0x76.0x1500.0) (1) E1 - CENTER UPRIGHT - W4L05650 3 3/8"x1 3/8"x59" (86x36.0x1500.0) K11 - FLOOR RAIL - W4L05657 5/8"x5 1/4"x88 7/8" (16.0x134.0x2256.
(1) G8 - GROUND BOARD - W101000 1"x5 1/4"x47 1/8" (24x134x1198) (2) G1 - FORT RAIL - W4L05694 1"x5 1/4"x47 1/8" (24x134x1198) (1) (1) G9 - GROUND BOARD/FORT RAIL - W101035 1"x5 1/4"x47 1/8" (24x134x1198) STEP 3 (1) G13 - GROUND BOARD - W4L05655 1"x5 1/4"x47 1/8" (24x134x1198) G12 - FORT RAIL - W4L05653 1"x5 1/4"x47 1/8" (24x134x1198) WASHER LOCK EXT 8x19 (24 PLCS) LAG SCREW WH 5/16x2 (24 PLCS) G12 G1 G1 G8 G13 G9 49 (24) LAG SCREW WH 5/16x2 (24) WASHER LOCK EXT 8x19
(2) H5 - FLOOR SUPPORT - W101038 1"x3 3/8"x47 1/8"" (24.0x86.0x1198.0) (2) H6 - FLOOR SUPPORT - W101036 1"x3 3/8"x38 7/8" (24.0x86.0x986.
(2) J1 - FLOOR SUPPORT - W101037 1"x2 3/8"x3" (24x60x76) (1) G12 - FORT RAIL - W4L05653 1"x5 1/4"x47 1/8" (24.0x134.0x1198.
(9) M6 - FLOOR BOARD - W101007 5/8"x3 3/8"x49" (16.0x86.0x1246.0) (2) N2 - FLOOR BOARD - W101044 5/8"x2 3/8"x49" (16.0x60.0x1246.0) (1) Y2 - OUTER FLOOR BOARD - W101034 5/8"x4"x41 1/8" (16.0x102.0x1046.
(1) G9 - GROUND BOARD/FORT RAIL - W101035 1"x5 1/4"x47 1/8" (24.0x134.0x1198.0) (2) G10 - FORT RAIL - W4L05652 1"x5 1/4"x49" (24.0x134.0x1246.
(4) F1 - ANGLE BRACE - W4L05660 1 3/8"x2 3/8"x20 1/4" (36x60x514) STEP 8 LAG SCREW WH 5/16x2 1/2 (4) T-NUT 5/16 BOLT WH 5/16x2 1/4 (4 PLCS) (4 PLCS) BOLT WH 5/16x2 1/4 (4) (8) WASHER LOCK EXT 8x19 (4) T-NUT 5/16 WASHER LOCK EXT 8x19 (8 PLCS) LAG SCREW WH 5/16x2 1/2 11 9 12 10 13 11 14 12 15 13 (4 PLCS) 4 2 3 1 2 5 3 6 4 7 5 8 6 9 7 10 8 ! 21 23 20 22 19 21 18 20 17 19 16 18 15 17 14 16 13 15 12 14 11 13 10 12 9 11 8 10 7 9 6 8 4 5 7 6 3 5 1 2 4 3 2 1 1
(4) STEP 9 F1 - ANGLE BRACE - W4L05660 1 3/8"x2 3/8"x20 1/4" (36x60x514) WASHER LOCK EXT 8x19 (8 PLCS) T-NUT 5/16 BOLT WH 5/16x2 (1 PLCS) LAG SCREW WH 5/16x2 1/2 (4) (1 PLCS) BOLT WH 5/16x2 (4) T-NUT 5/16 (1 PLCS) (8) WASHER LOCK EXT 8x19 (4) T-NUT 5/16 BOLT WH 5/16x2 (1 PLCS) F1 BOLT WH 5/16x2 (2 PLCS) F1 F1 T-NUT 5/16 (2 PLCS) 8 ! 8 6 7 5 6 4 5 3 4 2 3 1 2 9 7 10 11 9 12 10 13 11 14 12 15 13 F1 22 21 20 19 17 18 16 15 14 13 12 11 10 8 9 7 6 5 4
(2) J1 - FLOOR SUPPORT - W101037 1"x2 3/8"x3" (24x60x76) (1) SQ - "A" REVISION TAG - A100314 STEP 10 SQ SCREW PWH 8x5/8 (2 PLCS) (2) (4) SCREW PFH 8x1 3/4 J1 J1 (4 PLCS) 56 SCREW PWH 8x5/8 SCREW PFH 8x1 3/4
(12) (2) M1 - FLOOR BOARD - W4L05695 5/8"x3 3/8"x88 7/8" (16.0x86.0x2256.
(2) B4 - FORT UPRIGHT - W4L05684 3"x3"x59" (76.0x76.0x1500.0) (1) B6 - FORT UPRIGHT - W4L05686 3"x3"x59" (76.0x76.0x1500.0) (1) B8 - FORT UPRIGHT - W4L05685 3"x3"x59" (76.0x76.0x1500.0) (4) TZ - L BRACKET 2.
K1 - ARCHED WALL RAIL - W4L05665 (1) 5/8"x5 1/4"x88 1/2" (16.0x134.0x2248.0) (2) (1) G4 - FLOOR SUPPORT - W4L05673 1"x5 1/4"x55 7/8" (24.0x134.0x1418.0) K2 - WALL RAIL SINGLE ARCH - W4L05659 5/8"x5 1/4"x88 1/2" (16.0x134.0x2248.
(1) (1) G6 - SWING BEAM SUPPORT - W101015 1"x5 1/4"x47 1/8" (24.0x134.0x1198.0) (1) K10 - FORT RAIL - W4L05671 5/8"x5 1/4"x47 1/8" (16.0x134.0x1198.0) K5 - WALL BOARD - W101063 5/8"x5 1/4"x47 1/8" (16.0x134.0x1198.0) (1) K7 - WALL BOARD - W101074 5/8"x5 1/4"x47 1/8" (16.0x134.0x1198.
H2 - WALL RAIL - W4L05666 (2) 1"x3 3/8"x56 1/2" (24.0x86.0x1434.
(2) M2 - WALL RAIL - W4L05668 (1) 5/8"x3 3/8"x57 1/8" (16.0x86.0x1450.0) M7 - WALL RAIL - W101019 5/8"x3 3/8"x47 1/8" (16.0x86.0x1198.
(7) M13 - PORCH PICKET - W101003 5/8"x3 3/8"x21 1/8" (16.0x86.0x536.
(4) M16 - WALL RAIL - W101021 5/8"x3 3/8"x13 1/4" (16.0x86.0x338.0) (2) M18 - WALL RAIL - W4L05667 5/8"x3 3/8"x13 7/8" (16.0x86.0x354.
(2) M17 - CABIN WALL SLAT - W4L05661 5/8"x3 1/2"x52" (16.0x86.0x1320.0) (4) M3 - CABIN WALL SLAT - W101022 5/8"x3 1/2"x52" (16.0x86.0x1320.
(6) M12 - CABIN WALL SLAT - W101024 5/8"x3 3/8"x26 1/8" (16.0x86.0x664.
(4) TZ - L BRACKET 2.5x38x50x55 - A100340 STEP 21 CENTER BRACKETS ON THE BOARDS THEY ARE ATTACHED TO.
(2) N5 - WALL BOARD - W101026 5/8"x2 3/8"x26 1/8" (16.0x60.0x664.0) M12 - CABIN WALL SLAT - W101024 (13) 5/8"x3 3/8"x26 1/8" (16.0x86.0x664.
(1) K3 - CENTER WALL BOARD - W101027 5/8"x5 1/4"x52" (16.0x134.0x1320.0) (2) M4 - WALL BOARD - W101029 5/8"x3 3/8"x52" (16.0x86.0x1320.0) N1 - WALL BOARD - W101028 5/8"x2 3/8"x52" (16.0x60.0x1320.0) (10) N3 - WALL BOARD - W101030 5/8"x2 3/8"x34 1/8" (16.0x60.0x868.
O3 - WINDOW RAIL - W101002 (2) 5/8"x1 3/8"x12 1/8" (16.0x34.0x308.
(2) EB - WINDOW FRAME GREEN 343x444.
(4) G5 - BAY WINDOW HEADER - W101040 (4) 1"x5 1/4"x49 3/8" (24.0x134.0x1254.0) O1 - BAY WINDOW END CAP - W101039 5/8"x1 3/8"x22 1/2" (16.0x34.0x570.0) STEP 26 SCREW PFH 8x1 1/4 MAKE TWO.
WP1 - WINDOW PANEL - W2A01776 (6) 7/8"x16 3/4"x22 1/2" (21x426x570) STEP 27 MAKE TWO.
(2) BAY WINDOW ASSEMBLY STEP 28 (16) SCREW PFH 8x2 1/2 (16 PLCS) 74 SCREW PFH 8x2 1/2
(2) M20 - ROOF RAIL - W4L05670 5/8"x3 3/8"x56 7/8" (16.0x86.0x1446.
(4) H10 - ROOF TRUSS - W4L05677 1"x3 3/8"x45 1/8" (24.0x86.0x1146.
(2) M5 - GABLE BOARD - W101051 5/8"x3 3/8"x50 3/8" (16.0x86.0x1280.0) (2) (2) M8 - GABLE BOARD - W101052 5/8"x3 3/8"x43 3/4" (16.0x86.0x1110.0) M9 - GABLE BOARD - W101053 5/8"x3 3/8"x37" (16.0x86.0x940.
(2) (2) K8 - TRIANGLE SUNBURST - W4L05681 5/8"x5 1/4"x10 1/2" (16x134x268) (4) N10 - SUNBURST CROSS SPOKE - W4L05662 5/8"x2 3/8"x29 1/2" (16.0x60.0x750.0) N9 - GABLE TRIM - W4L05663 5/8"x2 3/8"x7 7/8" (16x60x200) STEP 32 (2) N11 - GABLE TRIM - W4L05664 5/8"x2 3/8"x13 1/2" (16x60x342) SCREW PFH 8x1 1/8 (5 PLCS) MAKE TWO.
(2) SUNBURST ASSEMBLY STEP 33 SCREW PFH 8x1 1/4 (16 PLCS) 79 (16) SCREW PFH 8x1 1/4
RP1 - ROOF PANEL - W2A01770 (1) 1 5/8"x15 5/8"x63 3/4" (42x396x1618) STEP 34 (4) SCREW PFH 8x2 1/4 (4 PLCS) RP1 80 SCREW PFH 8x2 1/4
RP2 - ROOF PANEL - W2A01771 (2) 1 5/8"x15 5/8"x63 3/4" (42x396x1618) STEP 35 (8) SCREW PFH 8x2 1/4 (8 PLCS) RP2 RP2 81 SCREW PFH 8x2 1/4
RP1 - ROOF PANEL - W2A01770 (1) 1 5/8"x15 5/8"x63 3/4" (42x396x1618) STEP 36 RP1 SCREW PFH 8x2 1/4 (4 PLCS) 82 (4) SCREW PFH 8x2 1/4
RP2 - ROOF PANEL - W2A01771 (2) 1 5/8"x15 5/8"x63 3/4" (42x396x1618) STEP 37 SCREW PFH 8x2 1/4 (8) (8 PLCS) RP2 RP2 83 SCREW PFH 8x2 1/4
(2) N12 - ROOF SUPPORT - W4L05676 5/8"x2 3/8"x33 3/8" (16x60x848) STEP 38 SCREW PFH 8x1 1/8 (12 PLCS) (12) ROOF PEAK INSIDE VIEW 2'-3 3/8" 2 1/2" 84 SCREW PFH 8x1 1/8
(2) H12 - AWNING CROSS BRACE - W4L05672 1"x3 3/8"x18" (24.0x86.0x456.0) (1) H13 - RAFTER BOARD - W4L05674 1"x3 3/8"x30" (24.0x86.0x762.0) (1) H3 - RAFTER BOARD - W4L05675 0.
(1) (1) N4 - SUNBURST CROSS SPOKE - W101047 5/8"x2 3/8"x29 1/2" (16.0x60.0x750.0) N7 - SUNBURST VERTICAL SPOKE - W101049 5/8"x2 3/8"x13 1/2" (16.0x60.0x342.0) (2) N8 - SUNBURST ANGLED SPOKE - W101050 5/8"x2 3/8"x7 7/8" (16.0x60.0x200.0) H7 - RAFTER BOARD - W4L05680 (1) 1"x3 3/8"x30"(24x86x762) H11 - RAFTER BOARD - W4L05679 1"x3 3/8"x30" (24.0x86.0x762.
STEP 41 (4) SCREW PFH 8x2 1/2 (4 PLCS) 87 SCREW PFH 8x2 1/2
RP5 - ROOF PANEL - W2A01774 (1) 1 5/8"x15 5/8"x22" (42x396x558) STEP 42 SCREW PFH 8x2 1/4 (2 PLCS) (2) SCREW PFH 8x2 1/4 (6) RP5 SCREW PFH 8x1 1/2 (6 PLCS) 88 SCREW PFH 8x1 1/2
RP6 - ROOF PANEL - W2A01775 (1) 1 5/8"x15 5/8"x22" (42x396x558) STEP 43 SCREW PFH 8x2 1/4 (2 PLCS) (2) SCREW PFH 8x2 1/4 (6) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (6 PLCS) RP6 89
RP3 - ROOF PANEL - W2A01772 (1) 1 5/8"x15 5/8"x22" (42x396x558) STEP 44 RP3 SCREW PFH 8x1 1/2 (6 PLCS) (2) SCREW PFH 8x2 1/4 (6) SCREW PFH 8x2 1/4 (2 PLCS) 90 SCREW PFH 8x1 1/2
RP4 - ROOF PANEL - W2A01773 (1) 1 5/8"x15 5/8"x22" (42x396x558) STEP 45 SCREW PFH 8x1 1/2 (2) SCREW PFH 8x2 1/4 (6 PLCS) (6) RP4 SCREW PFH 8x2 1/4 (2 PLCS) 91 SCREW PFH 8x1 1/2
(2) G11 - AWNING SUPPORT - W101072 1"x5 1/4"x23 5/8" (24.0x134.0x600.
(1) AWNING ASSEMBLY STEP 47 SCREW PFH 8x1 1/2 (2 PLCS) (2) (4) (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) T-NUT 5/16 (2 PLCS) SCREW PFH 8x1 3/4 (4 PLCS) 93 SCREW PFH 8x1 3/4 (2) BOLT WH 5/16x1 1/2 (2) BOLT WH 5/16x1 1/2 WASHER LOCK EXT 8x19 SCREW PFH 8x1 1/2 (2) T-NUT 5/16
(4) FX - HAND GRIP METAL GREEN 381 c/c - A100118 STEP 48 (8) SCREW TAPPING 14x1-1/2 (8) WASHER FLAT 9x18 SCREW TAPPING 14x1-1/2 (8 PLCS) WASHER FLAT 9x18 (8 PLCS) 94
(2) Q1 - SANDBOX SEAT - W4L05693 1"x4 3/8"x22 1/2" (24x112x572) STEP 49 (8) Q1 Q1 SCREW PFH 8x2 1/2 (8 PLCS) 95 SCREW PFH 8x2 1/2
(4) M19 - WALL RAIL - W4L05654 5/8"x3 3/8"x47 3/4" (16.0x86.0x1214.
(6) M15 - PICKET - W101055 5/8"x3 3/8"x16 3/4" (16.0x86.0x424.
(6) M15 - PICKET - W101055 5/8"x3 3/8"x16 3/4" (16.0x86.0x424.
M7 - WALL RAIL - W101019 (4) 5/8"x3 3/8"x47 1/8" (16.0x86.0x1198.
(6) M15 - PICKET - W101055 5/8"x3 3/8"x16 3/4" (16.0x86.0x424.
(6) M15 - PICKET - W101055 5/8"x3 3/8"x16 3/4" (16.0x86.0x424.
(2) H8 - PICNIC TABLE SEAT SUPPORT - W101056 1"x3 3/8"x22 7/8" (24.0x86.0x580.0) (2) H9 - PICNIC TABLE SUPPORT - W4L05669 1"x3 3/8"x14 1/4" (24.0x86.0x362.
(2) M11 - PICNIC TABLE CENTER LEG - W101057 5/8"x3 3/8"x29 1/2" (16.0x86.0x748.
(2) J1 - FLOOR SUPPORT - W101037 1"x2 3/8"x3" (24x60x76) (2) M10 - PICNIC TABLE BACK LEG - W101064 5/8"x3 3/8"x29 1/2" (16.0x86.0x748.0) (2) M14 - PICNIC TABLE FRONT LEG - W101061 5/8"x3 3/8"x19" (16.0x86.0x482.
(1) Y3 - PICNIC TABLE BOARD - W101062 5/8"x4"x41 1/8" (16.0x102.0x1044.
(2) K4 - PICNIC TABLE BOARD - W101059 5/8"x5 1/4"x49" (16.0x134.0x1246.
(2) H4 - PICNIC TABLE / SEAT - W101060 1"x3 3/8"x49" (24.0x86.0x1246.
(1) O2 - PICNIC TABLE SUPPORT - W101066 5/8"x1 3/8"x13 3/8" (16.0x34.0x340.0) (1) O4 - PICNIC TABLE SEAT SUPPORT - W101065 5/8"x1 3/8"x6 3/4" (16.0x34.0x172.0) STEP 62 CENTER CLEATS AND ATTACH.
(1) ROCK WALL ASSEMBLY STEP 63 (2) (2) BOLT WH 5/16x1 1/4 WASHER LOCK EXT 8x19 BOLT WH 5/16x1 1/4 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) 109
(1) LADDER STEP 64 (2) BOLT WH 5/16x1 1/4 BOLT WH 5/16x1 1/4 (2 PLCS) WASHER LOCK EXT 8x19 (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 (2 PLCS) T-NUT 5/16 (2 PLCS) 110
(1) SWING BEAM STEP 65 WASHER FLAT 8x27 (4 PLCS) WASHER SPLIT 5/16 BOLT HEX 5/16x1 1/4 (4 PLCS) (4 PLCS) 111 (4) BOLT HEX 5/16x1 1/4 (4) WASHER SPLIT 5/16 (4) WASHER FLAT 8x27
(1) 10FT SLIDE STEP 66 6 1/16" 3" 3" 2 3/4" BOLT WH 5/16x3/4 (3 PLCS) T-NUT 5/16 (3 PLCS) 112 (3) BOLT WH 5/16x3/4 (3) T-NUT 5/16
(4) (1) DN - GLIDER SEAT DARK GREEN - A100025 (4) (2) DJ - GLIDER ARM LIGHT GREEN - A100021 FT - CHAIN GREEN 47" - A100096 (2) EF - CHAIN GREEN 57" - A100047 DP - SWING SEAT GREEN - A100027 (8) FA - QUICK LINK - A100069 STEP 67 TIGHTEN QUICK LINK (2) NUT LOCK 5/16 (2) WASHER FLAT 8x27 INSERT CHAIN INTO QUICK LINK (2) BOLT WH 5/16x5 3/4 EF FA DP BOLT WH 5/16x5 3/4 NUT LOCK 5/16 (2 PLCS) (2 PLCS) WASHER FLAT 8x27 (2 PLCS) 113
(6) - GROUND STAKE REBAR - A4M00527 Anchoring Instructions STEP 68 (6) TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES. NOTE: 1. YOU WILL NEED TO REMOVE SOME FLOOR BOARDS TO INSTALL THE GROUND STAKE HARDWARE. (6) BOLT WH 5/16x1/2 WASHER LOCK EXT 12x19 2.
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
