Instructions / Assembly

Important Notes
1) OPEN AND ASSEMBLE ONE BOX AT A TIME to prevent confusion during assembly.
2)
USE THIS MANUAL IN CONJUNCTION WITH THE ASSEMBLY MANUAL FROM EACH BOX
to properly assemble your playset.
3) Note "Omitted" and "Modified" steps as found on each page of this manual.
4) Due to the modularity of this playset, some boards and hardware may not be used.
5) Some previously assembled parts may need to be removed for proper assembly of moduler pieces.
6) Take time before and after each step to make sure fort is square and level.
7) Tighten bolts securely, tighten nuts on bolts flush to the tube or member, and place caps over exposed
bolts snug to the nut.
8) Pay close attention to the ITEMS NEEDED FOR EACH STEP. They can be a valuable aid when sorting
your wood and hardware. Assembly will be made easier if items are sorted by step.
9) Pay close attention to make sure you are using the correct hardware in each step. Using incorrect
hardware may result in improper assembly.
10) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.
Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut. DO NOT
over tighten.
11) Read the steps of each step thoroughly. The written steps may include important information not shown
in the illustrations.
***READ ME FIRST!***