Full Product Manual

39
Post Installation FAQs
Shingles Aren’t Laying Flat
This is a normal condition. Please allow a minimum of (2) full weeks of temperatures above 60º F for
shingles to seal.
Subfloor Sheathing
Small gaps between subfloor sheathing sheets are a normal aspect of construction. You may caulk
gaps to fill and seal them if you wish. Floors may also be painted for additional protection and
appearance. Consult with a professional paint and caulk supplier for recommendations.
Spring Latches Do Not Function Properly
Spring Latches can become misaligned due to building settling. The building can be re-leveled or
adjustments can be made to the Spring Latches. To adjust, loosen all but (1) mounting screw and
rotate it slightly until the latch pin is aligned with the hole, then re-install the screws.
My Door Handle Is Loose
The handle on the inside of your door may come loose over time. To tighten or re-install the handle,
tighten the set screw onto the flat surface of the square shaft using an Allen wrench. A small amount
of lubricant may help with a sticky lock.
Leveling Your Building
Your building is leveled but over time it may settle causing the doors to function improperly. Relevel
structure as needed.