Instructions / Assembly

• 912885 Hammock Hanging chair
• One of cotton and fabric’s characteristics is that it has a built-in stretch factor depending on the humidity or
dryness of the air as well as amount of use. Therefore, the listed size is approximate. With use, a newly
purchased chair will reach its full size and length. WARNING: DO NOT EXCEED THE WEIGHT LIMIT OF 275 LBS.
Photo shows one possible way to hang your hammock chair and is an example only – frame shown is NOT included with chair, your hammock chair color MAY differ from photo.
• INSTALLATION & USAGE:
• 1) Be sure the construction from which you are hanging your hanging chair is of good
condition, sturdy, and large enough to securely and safely support the hammock and
its maximum safe weight limit.
• 2) Check for loose or untied ropes. • Check for fraying at possible wear points - Where
the ropes pass through the wooden spreader. - Around the metal ring at each end of
the hammock. - Where the ropes intersect in the body/hammock bed • Check ropes
by pulling on them. If ropes are weak, the hammock may be unsafe for use. • Check
for weak areas in the wood.
• 3) Unroll hammock chair and securely connect steel loop to hanger.
• 4) Make sure arms are untangled and in correct position
• 5) Carefully enter hammock chair from front holding swing in place.