Datasheet

ManualsBrandsBACO ManualsInput & Output DevicesKey switch + enclosure 240 Vac 2.5 A 1 maker LBX12610 IP66 1 pc(s)

47,9 39,7

M16/20

Ø 40

47,9 25,7

M16/20

Ø 39,2

47,9 48,4

M16/20

Ø 29,9

26,2

1413

2221

1211

2221

1211

2221

1211

2221

MUSHROOM HEAD Ø 40 EN 418/ISO 13850 - STAY-PUT

Compliant with the requirements of emergency stop:

IEC 60947-5-5 / EN 418/ISO 13850

Red NC ARRÊT D’URGENCE

LBX17101

Red 2 NC ARRÊT D’URGENCE

LBX17102

Red NC NOT AUS

LBX17201

Red 2 NC NOT AUS

LBX17202

Red NC EMERGENCY STOP

LBX17301

Red 2 NC EMERGENCY STOP

LBX17302

Contact blocks fixed behind cover (form p. 90)

LBX17201

Push-turn to reset

MUSHROOM HEAD Ø 40 - STAY-PUT

Red NC ARRÊT D’URGENCE

LBX10310

Red NC NOT AUS

LBX10410

Red NC EMERGENCY STOP

LBX10510

Contact blocks fixed behind cover (form p. 90)

LBX10510

Push-turn to reset

SELECTOR SWITCH - WITH KEY

Marking

Supplied with 2 keys profile n° 455

2 stay-put positions - 45°

Key free in position

0-1

Black NO

LBX12610

Cat. No.

Control stations ø 22

IP66

Base mounted contact- screw terminals

Conform to IEC 60947-5-1

Marking on control station

Frames and legend plates (p. 66)

Special marking and mounting (form p. 90)

CONTROL STATIONS WITH 1 BUTTON (

CONTINUED

)

Catalogue No. in bold: normally in stock at distribution outlets

Characteristics (p. 94)

Cross reference list (p. 311)

BACO_081-096_GB.qxd 3/12/09 17:16 Page 83

Summary of content (10 pages)

PAGE 1
Control stations ø 22 IP66 Base mounted contact- screw terminals Conform to IEC 60947-5-1 Marking on control station Frames and legend plates (p. 66) Special marking and mounting (form p. 90) Characteristics (p. 94) Cross reference list (p. 311) > CONTROL STATIONS WITH 1 BUTTON (CONTINUED) SELECTOR SWITCH - WITH KEY Cat. No.
PAGE 2
90 Avenue de Colmar BP 101 67024 STRASBOURG CEDEX1 Control and Signalling Units SUMMARY PAGES 1. Description, use................................... 1 2. Range ................................................. 1 3. Measurement ...................................... 2 4. Installation ........................................... 6 5. Technical characteristics ..................... 7 6. Compliance and approvals .................. 9 7. Equipment and Accessories ................ 9 1.
PAGE 3
Referen Reference(s) rence(s) : See range section 3. MEASUREMENT 3. MEASUREMENT Screw terminal block , single clip Screw terminal block , 5 position clip clip 19.6 26 19.6 20.1 20.1 64.5 (Double block) 43 25,6 50 50 Screw terminal erminal block , 3 position clip PlugPlug-in terminal block , single clip 64.5 with 2nd row contact block or double block 43 25.6 21 26 29 19.6 21 20.
PAGE 4
Reference(s) Reference(s) : See range section 3. MEASUREMENT 3. MEASUREMENT PlugPlug-in terminal block block , 3 position clip Faston terminal block , single clip 64.5 with 2 rows 42.85 31.35 31.35 26 25.52 20.1 21 21 30 19.65 43 PlugPlug-in terminal block , 5 position clip Faston terminal block , 3 position clip 26 21 62.
PAGE 5
Reference(s) Reference(s) : See range section 3. MEASUREMENT 3. MEASUREMENT PinPin-Style terminal, erminal, single clip Drill plan for PinPin-style terminal terminal blocks on Printed Circuit Ø 1.2 +0.1 / 0 Board (PCB) 11.75 25.52 11.75 45 19.65 20.1 11.75 11.75 30 10 10 PinPin-Style terminal, rminal, 3 position clip 30 30 Screw terminal contact block 20.1 19.65 19.65 19.65 11.75 20.1 11.75 3.8 5.7 10 10 PlugPlug-in terminal contact block 21 21 3.8 21.5 5.7 9.9 30 9.9 21.
PAGE 6
Reference(s) Reference(s) : See range ange section 3. MEASUREMENT 3. MEASUREMENT Faston terminal contact block PlugPlug-in terminals erminals LED block 21 60.5 21 20.3 3.8 18.21 21.5 5.7 9.9 9.9 21.5 Faston terminal erminal LED LED block block PinPin-style terminal contact block 20.3 30.3 39.75 30.3 32.2 27.2 18.5 9.9 9.9 21.5 Screw terminal LED LED block block PinPin-Style terminals LED block 18.21 9.9 Creation date: 22/10/07 21.5 18.5 Ø1 5 9.9 21.5 23.5 19.65 39.
PAGE 7
Reference(s) Reference(s) : See range section 3. MEASUREMENT 4. INSTALLATI INSTALLATION 39.4 Joystick block (screw terminal) terminal) 7.3 9.9 41.2 Double block (Screw terminal) terminal) 21 21 20.3 3.8 5.7 9.9 43 . with 3 and 5 position clip . Clip and head assembly Slot facing up Metal latch facing up 4. INSTALLATION Front panel mounting : . With single clip . Clip and head assembly Clip marker on the top Groove - face up Mark - face up Clip marker on the top .
PAGE 8
Reference(s) : See range section section 4. INSTALLATION 4. CONNECTION Tools : . For plug-in terminals, it is advisable to use screwdriver with Flat blade - 2.5 mm . For screw terminals, it is advisable to use screwdriver Phillips n°2 or screwdriver with flat blade - 5,5 mm .
PAGE 9
Reference(s) Reference(s) : See range section 5. TECHNICALS CHARACTERISTICS 5. TECHNICAL TECHNICAL CHARACTERISTICS . For joystick blocks . AC15 (Alternating current) - Ue = 60 V Ie = 10 A - Ue = 110 V Ie = 6 A - Ue = 220 V Ie = 3 A - Ue = 380 V Ie = 2 A - Ue = 500 V Ie = 1,5 A - Ue = 600 V Ie = 1,2 A . DC13 (Direct current) - Ue = 24 V Ie = 2,5 A - Ue = 48 V Ie = 1,4 A - Ue = 60 V Ie = 1 A - Ue = 110 V Ie = 0,55 A - Ue = 220 V Ie = 0,27 A - Ue = 300 V Ie = 0,2 A .
PAGE 10
Reference(s) : See range section 5. TECHNICAL CHARACTERISTICS 6. CONFORMITY CONFORMITY AND ACCREDITATION ACCREDITATION Storage temperature : . minimum : -40°C Standard compliances: compliances: maximum : +70°C . IEC 60947-5-1 . IEC 60947-5-5 . IEC 60947-5-4 . UL 508 . CSA 22.2 Cold test : . according to IEC 60068-2-1 Dry heat test : Appr Approvals . according to IEC 60068-2-2 . cULus and Bureau Véritas (Marine rules) . BBJ Constant humidity humidity test : .