Datasheet

ManualsBrandsBaco ManualsSwitch ActuatorsImpulse Switch Suitable for Pushbutton Switches

Heads, blocks and connection...

designed to last!

ÿ HEAD

“Cleverly designed to be both ergonomic and

clearly visible”

- Insulating material ensures electrical safety

- Integrated anti-rotation tab

- Legend holder frame keeps IP 66 protection

- Optimised ergonomic design

- Choice of bezels: black or chrome plastic

- Innovative and varied functions

- Optimised dimensions

See pages 21 to46

ÿ CLIP

“Flexibility of configuration: 1, 3 or 5 position clips

Contact blocks can be assembled in any order…”

- Enhanced rigidity

- For 1, 3 and 5 blocks

- Blocks are simply snapped onto the clip

See page 65

LOCKING

RING

Control and signalling units ø 22

BACO_001-016_GB.qxd 28/11/12 11:56 Page 6

Summary of content (93 pages)

PAGE 1
Control and signalling units ø 22 Heads, blocks and connection...
PAGE 2
ÿ CONNECTION PLUG-IN TERMINALS - New [ Time-saving and completely safe.
PAGE 3
Control and signalling units ø 22 New heads...
PAGE 4
ÿ MARKING WITH LEGENDS - Frame can be turned to 4 positions (0° ; 90° ; 180° and 270°) - Special legend plate for double touch - Legend plates: choice between 5 colours, blank or preengraved Bezels Choice between: black or chrome Engraving Frame Button plate can be mounted in 4 positions (0° ; 90° ; 180° and 270°) round or square shape, 30 or 40 mm wide Legend plate can be clipped into place after installation ÿ READY-ASSEMBLED CONTROL STATION - Innovative design - 1, 2 or 3 buttons See page 82 9
PAGE 5
Control and signalling units ø 22 Simplicity, speed, choice! w w 2 w w w 1 Auto-grip ring Fixing head held firmly in the drilling hole during assembly Locking ring to fix the head ÿ ADVANTAGES Our objective is to simplify and shorten time of installation: - Head held firmly in place by auto-grip ring, allows single-hand mounting - Foolproof method of positioning the block sub-assembly correctly on the head - Rotating metallic latch easily accessible with a screwdriver where space is limited 1
PAGE 6
ÿ CONFIGURATIONS “A range designed to meet adapt to all requirements and all situations” COMPLETE UNITS - Control and signalling units are supplied ready for use with head and pre-assembled block/clip - A single product code provides a solution for the most common needs SEPARATE UNITS - Maximum flexibility - For numerous possible solutions w 1 Quick connection No tool required for wires with ferrules. New plug-in terminals 2 CUSTOMISED SOLUTIONS (request form p.
PAGE 7
Complete units: Push-buttons ø 22 > SPRING RETURN - NON ILLUMINATED IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) FLUSH Cat. No.
PAGE 8
Complete units: Selector switches ø 22 IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED WITH HANDLE 2 positions Ø 29,9 Stay-put positions - 90° 0 1 NO 13 L21KE03B 14 43 23 Black Cat. No. 20,1 19,6 L21KE03B WITH HANDLE 3 positions Ø 29,9 Cat. No.
PAGE 9
Complete units: Mushroom heads ø 22 IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Conform to IEC 60947-5-1 Characteristics (p. 94) > MUSHROOM HEADS - NON ILLUMINATED Ø 40 - SPRING RETURN Push Cat. No. Plastic chrome bezel Black bezel on request (form p. 79) Red NC 21 22 L21AD01C L21AD01C 43 22 Ø 40 20,1 19,6 Ø 40 - STAY-PUT Push-turn to reset Cat. No. Black bezel Red NC 21 L22ED01D 43 25,7 Ø 40 20,1 19,6 Catalogue No.
PAGE 10
Complete units: Mushroom heads ø 22 IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Plastic black bezel Conform to IEC 60947-5-1 Characteristics (p. 94) > MUSHROOM HEADS - NON ILLUMINATED (CONTINUED) Ø 40 - STAY-PUT Push-pull to reset Red Cat. No. NC 21 22 L22DD01A L22DD01A 43 34,2 Ø 40 20,1 19,6 Ø 40 - STAY-PUT Key to reset Cat. No. Supplied with 2 keys profile n°455 Red NC 21 L22GM01E 43 30,7 53,7 Ø 40 20,1 19,6 Catalogue No.
PAGE 11
Complete units: Mushroom heads ø 22 IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Plastic black bezel Conform to IEC 60947-5-1 Characteristics (p. 94) > EN 418/ISO 13850 EMERGENCY STOP - NON ILLUMINATED Ø 40 EN 418/ISO 13850 - STAY-PUT Push-turn to reset Cat. No.
PAGE 12
Complete units: Mushroom heads ø 22 IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Plastic black bezel Conform to IEC 60947-5-1 Characteristics (p. 94) > EN 418/ISO 13850 EMERGENCY STOP - NON ILLUMINATED Ø 40 EN 418/ISO 13850 - STAY-PUT Key to reset Cat. No.
PAGE 13
Complete units: Pushbuttons ø 22 > SPRING RETURN - ILLUMINATED IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) FLUSH Cat. No.
PAGE 14
Complete units: Selector switches ø 22 > SELECTOR SWITCHES - ILLUMINATED WITH HANDLE IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) 2 positions Ø 29,9 23 LED blocks 43 Stay-put positions - 45° 24 V 26 Red Green Black Cat. No. 13 14 X1 21 NO + NC NO + NC NO + NC L21KG10C Catalogue No.
PAGE 15
Complete units: Pilot lights ø 22 IP 66 Complete units consisting of: - head - clip and screw electrical blocks assembled Conform to IEC 60947-5-1 Characteristics (p. 94) > PILOT LIGHTS Cat. No. 11,3 Ø 29,9 LED blocks X1 X2 43 24 V 20,1 L20SE20L 19,6 Red Green Yellow White Blue 130 V Red Green Yellow White Blue 230V Red Green Yellow White Blue One-piece pilot lights (p. 45-46) Catalogue No.
PAGE 16
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - NON ILLUMINATED SPRING RETURN - FLUSH Cat. No. 11 Ø 29,9 L21AA02 Without engraving Red Green Black Yellow White Blue With engraving L21AA01 L21AA02 L21AA03 L21AA04 L21AA05 L21AA06 Red L21AA81 Black L21AA83 Green On demand engraving (p.
PAGE 17
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - NON ILLUMINATED (CONTINUED) SPRING RETURN - SUPER FLUSH 2,8 Cat. No. 29,6 32,4 Ø 38 L23AA02 Metallic chrome bezel Cut-out ø 30,5 mm Without engraving Red Green Black Yellow White Blue With engraving Red Green On demand engraving (p.
PAGE 18
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - NON ILLUMINATED (CONTINUED) SPRING RETURN - MUSHROOM HEAD Ø 40 Push Cat. No.
PAGE 19
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p.
PAGE 20
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic black bezel Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - NON ILLUMINATED (CONTINUED) STAY-PUT - PROJECTING Cat. No. 16,3 Ø 29,9 Plastic chrome bezel Black bezel on request (form p.
PAGE 21
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic black bezel Conform to IEC 60947-5-1 Characteristics (p. 94) > MUSHROOM HEAD - NON ILLUMINATED (CONTINUED) Ø 40 - STAY-PUT Push-pull to reset Ø 40 34,2 Red Black Cat. No.
PAGE 22
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic black bezel Conform to IEC 60947-5-1 Characteristics (p. 94) > EN 418/ISO 13850 EMERGENCY STOP - NON ILLUMINATED (CONTINUED) Ø 40 EN 418/ISO 13850 - STAY-PUT Push-pull to reset Ø 40 Cat. No.
PAGE 23
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) Equipped with a locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED WITH HANDLE 2 positions Stay-put positions - 45° 23 Ø 29,9 L21KA03 Cat. No.
PAGE 24
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) With locking ring Plastic chrome bezel- Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED (CONTINUED) WITH HANDLE Stay-put positions - 45° 23 Ø 29,9 L21MA03 Cat. No.
PAGE 25
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) With locking ring Plastic chrome bezel- Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED (CONTINUED) WITH LONG HANDLE 2 positions Stay-put positions - 45° Ø 29,9 23 24 L21KP03 Cat. No.
PAGE 26
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) With locking ring Plastic chrome bezel- Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED (CONTINUED) WITH LONG HANDLE 3 positions Stay-put positions - 45° Ø 29,9 23 24 L21MR03 Cat. No.
PAGE 27
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) With locking ring Plastic chrome bezel- Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED (CONTINUED) WITH KNOB 2 positions Ø 29,9 Cat. No.
PAGE 28
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) With locking ring Plastic chrome bezel- Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED (CONTINUED) WITH KEY 2 positions Cat. No.
PAGE 29
Separate units ø 22: Heads IP 66 To be combined with a clip and electrical blocks (p. 48) With locking ring Plastic chrome bezel- Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - NON ILLUMINATED (CONTINUED) WITH KEY 3 positions Cat. No.
PAGE 30
Separate units ø 22: Heads IP 65 With locking ring Plastic chrome bezel Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > ADJUSTABLE MECHANICAL PUSH/RESET BUTTON - NON ILLUMINATED SPRING RETURN - FLUSH Cat. No. 20,8 Ø 29,4 To be used without electrical block Stroke 11 mm Adjustable: 26 mm min to 46 mm max / front side of panel Without engraving Red Green Black Yellow White Blue L21HA01 On demand engraving (p.
PAGE 31
Separate units ø 22: Heads IP 65 With locking ring Conform to IEC 60947-5-1 Characteristics (p. 94) > BUTTON FOR POTENTIOMETER - NON ILLUMINATED Cat. No. Ø 29,4 Head + mounting base for potentiometer Plastic chrome bezel L21RP03 22 Shaft ø 6 or 6.35 mm Potentiometer length 46 to 51 mm L21RP03 > JOYSTICKS - NON ILLUMINATED Cat. No. Heads supplied with a 3 position clip Specific electrical blocks (p.
PAGE 32
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Plastic chrome bezel- Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - ILLUMINATED Cat. No. SPRING RETURN - FLUSH Without engraving 11 Red Green Yellow White Blue Ø 29,9 L21AH20 On demand engraving (p.
PAGE 33
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Plastic chrome bezel Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - ILLUMINATED (CONTINUED) SPRING RETURN - PROJECTING Cat. No.
PAGE 34
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - ILLUMINATED (CONTINUED) SPRING RETURN - FLUSH-PROJECTING Double touch 11 17 53,9 29,9 L61QK21 SPRING RETURN - FLUSH-PROJECTING 19 Cat. No.
PAGE 35
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > PUSH-BUTTONS - ILLUMINATED (CONTINUED) STAY-PUT - FLUSH Réf.
PAGE 36
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Black bezel Conform to IEC 60947-5-1 Characteristics (p. 94) > MUSHROOM HEADS - ILLUMINATED Ø 32 - STAY-PUT Push-turn to reset L22EL10 Red 25,7 Ø 32 Cat. No.
PAGE 37
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > EN 418/ISO 13850 EMERGENCY STOP - ILLUMINATED Ø 40 EN 418/ISO 13850- STAY-PUT Push-pull to reset Cat. No.
PAGE 38
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - ILLUMINATED WITH HANDLE 3 positions Cat. No.
PAGE 39
Separate units ø 22: Heads IP 66 To be combined with a clip, LED block and contact blocks (p. 48) With locking ring Plastic chrome bezel - Black bezel on request (form p. 79) Conform to IEC 60947-5-1 Characteristics (p. 94) > SELECTOR SWITCHES - ILLUMINATED (CONTINUED) WITH LONG HANDLE 2 positions Cat.
PAGE 40
Pilot lights ø 22 IP 66 To be combined with a clip, LED block (p. 51) With locking ring Conform to IEC 60947-5-1 Characteristics (p. 94) > PILOT LIGHTS - SEPARATE UNITS Cat. No To be combined with a clip and LED block (p. 51) 11,25 Ø 29,9 Without engraving Red Green Yellow White Blue L20SE20 On demand engraving (p.
PAGE 41
Pilot lights ø 22 IP 66 Direct supply Characteristics (p. 94) > ONE-PIECE PILOT LIGHTS (CONTINUED) Cat. No. 6 44,1 14,3 1à6 Ø 29,8 24V Without engraving Ø 20,2 Ø 22 Ø 29,5 L20SA10M Supplied with LED bulb-type BA9S Smooth lens Red Green Yellow White Blue L20SA10L L20SA20L L20SA40L L20SA50L L20SA60L Red Green Yellow Colourless Blue L20SA31L L20SA32L L20SA34L L20SA33L L20SA36L On demand engraving (p.
PAGE 42
Block holder clips for assembly as you require 1, 3 or 5-position clips ÿ CLIP ÿ BLOCK ÿ 3 BLOCKS ÿ MATERIAL “A flexible configuration for assembly in any order…” “Imaginatively designed to be safe, robust and durable” - IP20 as “finger safe” - Electrical insulation - Corrosion-resistant ÿ 5 BLOCKS ÿ ENVIRONMENT - Respect for the environment, RoHS compliant ÿ MODULAR Stacking without accessories - Snap fit, tools not required to attach contact blocks - Cost effective solution: 1 position clip - B
PAGE 43
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > CONTACT BLOCKS - FOR NON ILLUMINATED HEADS SCREW TERMINALS 1 position clip NO 43 NC 20,1 Cat. No.
PAGE 44
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > CONTACT BLOCKS - FOR NON ILLUMINATED HEADS (CONTINUED) PLUG-IN TERMINALS 1 position clip NO 43 NC 21 21 Cat. No.
PAGE 45
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > CONTACT BLOCKS - FOR NON ILLUMINATED HEADS (CONTINUED) FASTON TERMINALS 1 position clip NO 43 NC 62,5 Cat. No. 13 14 21 22 13 14 331ED10 331ED01 29 331ED10 FASTON TERMINALS 3 position clip NO + NC 21 30,3 26 62,5 30 333ED11 Catalogue No.
PAGE 46
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > ELECTRICAL BLOCKS - FOR ILLUMINATED HEADS SCREW TERMINALS 1 position clip: LED block Cat. No.
PAGE 47
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > ELECTRICAL BLOCKS - FOR ILLUMINATED HEADS (CONTINUED) SCREW TERMINALS 3 position clip: LED block + NC Cat. No.
PAGE 48
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > ELECTRICAL BLOCKS - FOR ILLUMINATED HEADS (CONTINUED) SCREW TERMINALS 3 position clip: NO + LED block + NC LED 26 13 14 X1 X2 21 43 24 V 20,1 333EARL11 19,6 Cat. No.
PAGE 49
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > ELECTRICAL BLOCKS - FOR ILLUMINATED HEADS (CONTINUED) PLUG-IN TERMINALS 1 position clip: LED block Cat. No.
PAGE 50
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > ELECTRICAL BLOCKS - FOR ILLUMINATED HEADS (CONTINUED) PLUG-IN TERMINALS 3 position clip: LED block + NC Cat. No.
PAGE 51
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > ELECTRICAL BLOCKS - FOR ILLUMINATED HEADS (CONTINUED) FASTON TERMINALS 1 position clip: LED block Cat. No.
PAGE 52
Separate units: Blocks sub-assemblies IP 20 Clip and electrical blocks assembled To be combined with a head (p. 21) Mounting (p. 92) Conform to IEC 60947-5-1 Characteristics (p. 94) > ELECTRICAL BLOCKS - FOR ILLUMINATED HEADS (CONTINUED) FASTON TERMINALS 3 position clip: LED block + NC Cat. No.
PAGE 53
Separate units: Blocks IP 20 To be combined with a 1, 3 or 5 position clip (p. 65) Characteristics (p. 94) > CONTACT BLOCKS SCREW TERMINALS Cat. No.
PAGE 54
Separate units: Blocks IP 20 To be combined with a 1, 3 or 5 position clip (p. 65) Characteristics (p. 94) > CONTACT BLOCKS (CONTINUED) FOR PCB (PIN-STYLE TERMINALS) Cat. No. 32,2 39,75 NO 27,2 3 NC 1 4 33P10 2 33P01 4 33P10Y7 2 33P01Y7 9,9 Golden contacts for low current 33P10 NO 3 NC 1 FOR CONTROL STATIONS (SCREW TERMINALS) 39,3 42,2 28,2 For un-equipped control stations (p. 86) Base mounted 9,9 NO 3 NC 1 4 33S10 2 33S01 33S01 Catalogue No.
PAGE 55
Separate units: Blocks IP 20 To be combined with a 1, 3 or 5 position clip (p. 65) Characteristics (p. 94) > LED BLOCKS SCREW TERMINALS Cat. No. LED 3,8 20,1 19,7 19,7 9,9 21,5 33EARL X1 18,2 X2 24 V White Red Green Blue Yellow 48 V White Red Green Blue Yellow 130 V White Red Green Blue Yellow 230 V White Red Green Blue Yellow Catalogue No.
PAGE 56
Separate units: Blocks IP 20 To be combined with a 1, 3 or 5 position clip (p. 65) Characteristics (p. 94) > LED BLOCKS (CONTINUED) PLUG-IN TERMINALS Cat. No.
PAGE 57
Separate units: Blocks IP 20 To be combined with a 1, 3 or 5 position clip (p. 65) Characteristics (p. 94) > LED BLOCKS (CONTINUED) FOR PCB (PIN STYLE) LED 20,3 23,5 39,75 Cat. No. 18,5 X2 24 V 33PAWL 33PARL 33PAGL 33PABL 33PAYL White Red Green Blue Yellow 9,9 5 21,5 X1 Ø1 33PAWL FOR CONTROL STATIONS (SCREW TERMINALS) For un-equipped control stations (p.
PAGE 58
Separate units: Blocks IP 20 To be combined with a 1, 3 or 5 position clip (p. 65) Characteristics (p. 94) > SPECIFIC BLOCKS FOR JOYSTICKS (SCREW TERMINALS) 39,4 Cat. No. 7,3 9,9 41,2 Joysticks (p. 36) NO -NC 1 2 3 4 LM11 LM11 LAMP-TEST BLOCKS (SCREW TERMINALS) For 24 and 48 V 19,7 19,7 20,1 3,8 9,9 21,5 1 diod Y X1 2 diods X1 Y 33ET 33ETT X 33ET For 130 and 230 V (form p.
PAGE 59
Separate units: Blocks IP 20 To be combined with a 1, 3 or 5 position clip (p. 65) Characteristics (p. 94) > SPECIFIC BLOCKS FILTER BLOCKS (SCREW TERMINALS) Cat. No.
PAGE 60
Accessories Characteristics (p. 94) > CLIPS CLIPS Cat. No. 35 To be combined with blocks (p. 58 to 64) 24,52 1 position 331E 3 positions 333E 5 positions (only for ø 22 heads) 335E 23,6 43,7 37 331E 30 8,8 43,7 37 333E 50 11,6 335E > ROUND LEGEND PLATE FOR MUSHROOM HEAD Cat. No. Yellow, black engraving LWE16300 ø 60 ARRET D’URGENCE NOT AUS EMERGENCY STOP LWE16100 LWE16200 LWE16300 ø 80 ARRET D’URGENCE NOT AUS EMERGENCY STOP LWE00100 LWE00200 LWE00300 Other languages (form p.
PAGE 61
Accessories ø 22 Characteristics (p. 94) > COMPLETE FRAMES Standard model - 30 x 45 mm ,7 Ø 27 45 11,4 30 30 24,6 Round shape Black frame and legend plate unassembled 2 lines maximum, 13 characters per line Without engraving R 15 4 LWP31 Cat. No. White Red Alu Black On demand engraving (p. 70) Symbol code to be added at the end of the catalogue number White Red Alu Black Protective mask for legend plate (paper or other ...
PAGE 62
Accessories ø 22 Characteristics (p. 94) > LEGEND PLATES TO BE ENGRAVED 11,4 24,6 LIA1 Without engraving White Red Alu Black On demand engraving (p. 70) Symbol code to be added at the end of the catalogue number White - black engraving Red - white engraving Alu - black engraving Black - white engraving Protective mask for legend plate (paper or other ...
PAGE 63
Accessories ø 22 Characteristics (p. 94) > LEGEND PLATES ENGRAVED Small model Cat. No. 11,4 Alu legend plate, black engraving For round and square frames cat. nos. LWP3, LWP4 et LWP2 (p. 69) 1,4 24,6 LIA9081 ENGRAVED With standard engraving O-I I-II I-O-II MANU-O-AUTO HAND-O-AUTO START ON OFF RESET RUN HAND-AUTO LIA9081 LIA9082 LIA9091 LIA9191 LIA9291 LIA9301 LIA9303 LIA9304 LIA9315 LIA9327 LIA9383 On demand engraving (p.
PAGE 64
Accessories ø 22 Characteristics (p. 94) > FRAMES ROUND Standard model For legend plates cat. nos. LIA5, LIA1, LIA 9, LIA 3 (p. 67) Black LWP3 45 30 11,4 30 24,6 Ø Cat. No. ,7 27 R 15 4 LWP3 ROUND Large model For legend plates cat. nos. LIB5, LIB1, LIB 9, LIB 3 (p. 67) 30 ,7 27 Ø Black LWG3 45 11,4 40 34,6 R 15 4 LWG3 SQUARE Standard model For legend plates cat. nos. LIA5, LIA1, LIA 9, LIA 3 (p.
PAGE 65
Engravings > STANDARD TEXTS Symbol code to be added at the end of the catalogue number UNIVERSAL TEXT Cat. No. For selector switches and legend plates 0-I I-II I-0-II I-II-III 0-I-START 0-I-II 081 082 091 092 093 094 ENGLISH TEXT For buttons, pilot lights and legend plates CLOSE DOWN FAST FORWARD INCH JOG LEFT LOWER OFF ON OPEN POWER-ON RAISE RESET REVERSE RIGHT RUN SLOW START STOP UP 314 336 310 305 329 328 311 308 304 303 313 330 307 315 306 312 327 309 301 302 335 FORW.-OFF-REV.
PAGE 66
Engravings > STANDARD TEXTS (CONTINUED) Symbol code to be added at the end of the catalogue number GERMAN TEXT Cat. No.
PAGE 67
Symbols > STANDARD SYMBOLS ISO/DIN Symbol code to be added at the end of the catalogue number Description Symbol Cat. No. Continuous straight-line movement ISO 1 A01 Alternating straight-line movement ISO 5 A05 Continuous rotating movement clockwise ISO 7A - DIN 100 A07 Continuous rotating mov.
PAGE 68
Symbols Symbol code to be added at the end of the catalogue number > STANDARD SYMBOLS ISO/DIN (CONTINUED) Description Symbol Cat. No. De-clutch ISO 75 - DIN 45 A75 Warning “live” (energized) ISO 92 - DIN 131 A92 Main switch ISO 94 A94 Lubrification jet ISO 101 C01 Machine lighting ISO 102 - DIN 139 C02 Greasing ISO 107 - DIN 175 C07 Blow ISO 108 - DIN 263 C08 Suction ISO 109 - DIN 264 C09 Sound alarm DIN 155 D01 > ADDITIONAL STANDARD SYMBOLS Symbol Cat. No.
PAGE 69
Accessories ø 22 > BUTTON PLATES - FOR HEADS WITHOUT BUTTON PLATE NON ILLUMINATED Characteristics (p. 94) Cat. No. For use with spring return button cat. no. L21AA00 (p. 21) Without engraving LT05 Red Green Black Yellow White Blue On demand engraving (p. 70) Symbol code to be added at the end of the catalogue number LT21302 Red Green Black Yellow White Blue LT01 LT02 LT03 LT04 LT05 LT06 LT21 LT22 LT23 LT24 LT25 LT26 ILLUMINATED For use with spring return button cat. no. L21AH00 (p.
PAGE 70
Accessories ø 22 > SHROUDS - REINFORCED DEGREE OF PROTECTION: IP 67 FOR PUSH-BUTTONS PROJECTING Cat. No. For spring return or stay-put buttons Transparent For non illuminated spring return buttons LWA0203 Characteristics (p.
PAGE 71
Accessories ø 22 Characteristics (p. 94) > MISCELLANEOUS GUARD Cat. No. For spring return button and spring return mushroom head (maxi ø 40) Grey LWA0225 LWA0225 PADLOCKABLE GUARD For stay-put mushroom head Yellow High (Height: 40 mm) LWA0240 LWA0240 SQUARE FRAME For turning a round shape button or a pilot light into a square shape Black LWA0230 LWA0230 RELAY TERMINAL (EARTH OR NEUTRAL) For control station Base mounted LWA0216 Catalogue No.
PAGE 72
Accessories ø 22 Characteristics (p. 94) > MISCELLANEOUS (CONTINUED) BULBS Cat. No. For one-piece pilot light with direct supply Bulb BA9S (see p. 45) LWDN230 Neon 230 V For red, yellow, white pilot light LWDN230 For BA9S bulbs LWA0201 For selector switches LWA0237 BULB EXTRACTOR LWA0201 ANTI-ROTATION RING LWA0237 BLANKING PLUG Black Grey LWA0229 Catalogue No.
PAGE 73
Accessories ø 22 Characteristics (p. 94) > MISCELLANEOUS (CONTINUED) FIXING TOOL Cat. No. Fixing tool for locking ring LWA0234 LWA0234 REDUCTION RING Ø 30/22 Converts ø 30 mm cut-out to 22 mm hole Grey LWA0219 Yellow LWA0220 LWA0219 PUSH BUTTON SUPPORT CLIP-ON TO DIN RAIL For pilot lights, spring return buttons and selector switches LWA0238 For spring return push-buttons LWA0226 LWA0238 PADLOCKABLE SHROUD LWA0226 Catalogue No.
PAGE 74
Request form for specific control and signalling units ø 22 > HEAD (fill in one form for each type of product) > BLOCKS AND CLIPS Options : Type : q Illuminated button q EN 418/ISO 13850 q Spring return flush q Spring return q Spring return projecting q Mushroom head spring return q Push-push stay-put q Flush q Projecting Size (mm): Mushroom head q Ø 32 q Ø 40 q Ø 70 q Push-push super flush Colour : q Colourless q Black q White q Yellow q Mushroom head push-pull stay-put q Mushroom head pus
PAGE 75
control and signalling units ø 22 Control stations solution boxes Control stations with mushroom heads Control stations with buttons pre-assembled 1, 2 or 3 buttons ÿ ADVANTAGES “All types of control station applications can be achieved” - Multipurpose, pre-equipped with mushroom head or pushbuttons - Enclosures for custom assembly 1,2,3,4 or 5 holes - Up to 3 blocks per position - Innovative design 80
PAGE 76
ÿ SPECIAL REQUEST Custom assemblies and engraving options Enclosures 1, 2, 3, 4 or 5 holes See page 90 81
PAGE 77
Control stations ø 22 IP 66 Base mounted contact- screw terminals Conform to IEC 60947-5-1 Marking on control station Frames and legend plates (p. 66) Special engraving on enclosure and mounting (form p. 90) Characteristics (p. 94) > CONTROL STATIONS WITH 1 BUTTON - NON ILLUMINATED SPRING RETURN - FLUSH Cat. No.
PAGE 78
Control stations ø 22 IP66 Base mounted contact- screw terminals Conform to IEC 60947-5-1 Marking on control station Frames and legend plates (p. 66) Special marking and mounting (form p. 90) Characteristics (p. 94) > CONTROL STATIONS WITH 1 BUTTON (CONTINUED) SELECTOR SWITCH - WITH KEY Cat. No.
PAGE 79
Control stations ø 22 IP 66 Base mounted contact- screw terminals Conform to IEC 60947-5-1 Marking on control station Frames and legend plates (p. 66) Special engraving and mounting (form p. 90) Characteristics (p. 94) > CONTROL STATIONS WITH 1 BUTTON (CONTINUED) MUSHROOM HEAD Ø 40 EN 418/ISO 13850 - STAY-PUT Push-pull to reset 47,9 39,7 Cat. No.
PAGE 80
Control stations ø 22 IP 66 Base mounted contact- screw terminals Conform to IEC 60947-5-1 Marking on control station Frames and legend plates (p. 66) Special engraving and mounting (form p. 90) Characteristics (p. 94) > CONTROL STATIONS WITH 2 BUTTONS SPRING RETURN - FLUSH Cat. No. 47,9 Marking 11 Green Red NO NC 13 14 21 22 LBX20120 Ø 29,9 Ø 29,9 M16/20 M16/20 LBX20120 > CONTROL STATIONS WITH 3 BUTTONS SPRING RETURN - FLUSH Cat. No.
PAGE 81
Control stations ø 22 Empty enclosures to be equipped with: - illuminated or non illuminated heads p . 21-45 - specific blocks for control stations (base mounted) p. 62 - frames and legend plates p. 66 Other control stations to be equipped (form p. 90) Characteristics (p. 94) > ENCLOSURES 1 HOLE Cat. No. Black base Grey cover Yellow cover LBX0100 LBX0100J LBX0100J 47,9 42,5 74 M16/20 8 16,5 74 59,5 Ø 4,5 Ø 4,5 M16/20 2 HOLES Cat. No.
PAGE 82
Control stations ø 22 Empty enclosures to be equipped with: - illuminated or non illuminated heads p . 21-45 - specific blocks for control stations (base mounted) p. 62 - frames and legend plates p. 66 Other enclosures (form p. 90) Characteristics (p. 94) > ENCLOSURES (CONTINUED) 3 HOLES Cat. No. Black base Grey cover LBX0300 47,9 42,5 74 M16/20 8 16,5 140 125,5 Ø 4,5 Ø 4,5 M16/20 Catalogue No.
PAGE 83
Control stations ø 22 Empty enclosures to be equipped with: - illuminated or non illuminated heads p . 21-45 - specific blocks for control stations (base mounted) p. 62 - frames and legend plates p. 66 Other enclosures (form p. 90) Characteristics (p. 94) > ENCLOSURES (CONTINUED) 4 HOLES Cat. No. Black base Grey cover LBX0400 47,9 42,5 74 M16/20 8 16,5 173 158,5 Ø 4,5 Ø 4,5 M16/20 Catalogue No.
PAGE 84
Control stations ø 22 Empty enclosures to be equipped with: - illuminated or non illuminated heads p . 21-45 - specific blocks for control stations (base mounted) p. 62 - frames and legend plates p. 66 Other enclosures (form p. 90) Characteristics (p. 94) > ENCLOSURES (CONTINUED) 5 HOLES Cat. No. Black base Grey cover LBX0500 47,9 42,5 74 M16/20 8 16,5 206 191,5 Ø 4,5 Ø 4,5 M16/20 Catalogue No.
PAGE 85
Request form for specific control station ø 22 > EQUIPPED CONTROL STATION (fill in one form for each type of product) Mounting: q horizontal q vertical Unit type : q 1 hole q 2 holes q 3 holes q yellow cover (only 1 hole) q 4 holes YOUR DETAILS Company: ............................................................ ..............................................................................
PAGE 86
Panel cut-out DRILLING For heads equipped with electrical blocks with screw or plug-in terminals +0,4 Ø 22,3 -0 Minimum interval (mm) = 30 With or without legend (usual case) = 40 With large legend plate > 45 For selector switch with long handle = 33 A B A B > 40 = 38 = 50 = 45 = 54 = 77 = 50 DRILLING FOR SUPER-FLUSH BUTTON Ø 30,5 +0,5 -0 DRILLING WHEN USING THE ANTI-ROTATION RING (OPTIONAL) +0,4 Ø 22,3 -0 24,1 +0,4 -0 3,2 THICKNESS OF PANEL (E) E = 1 to 6 mm E 91 IP 67 (silicon sh
PAGE 87
Mounting blocks ø 22 NON ILLUMINATED 43 Head with 1 contact block on a 1 position clip Head with 1 or 2 contact blocks on a 3 position clip 43 Head with 3 contact blocks on a 3 position clip 43 Head with 4 or 5 contact blocks on a 5 position clip 50 Head with 4, 5 or 6 contact blocks 2nd level of contact blocks stacked directly on first row (3 position clip) 64,5 92
PAGE 88
Mounting blocks ø 22 ILLUMINATED 43 Pilot light on a 1 position clip Illuminated head with LED and 1 or 2 contact blocks on a 3 position clip 43 Illuminated head with LED and 3 or 4 contact blocks 2nd level of contact blocks stacked directly on first row (3 position clip) 64,5 Illuminated head with LED on transformer supply with 1 or 2 contact blocks on a 3 position clip 80,5 Illuminated head with LED and 3 or 4 contact blocks on a 5 position clip 50 Illuminated blocks 93
PAGE 89
Technical characteristics > GENERAL Characteristics Data Standards > Storage temperature - 40 °C to + 70 °C > Operating temperature - 25 °C to + 70 °C > Climatic resistance Constant humid heat Cyclic damp heat Resistance to sea air IEC 60068-2-3 IEC 60068-2-30 IEC 60068-2-52 > Degree of protection IP 66 for standard heads IP 67 for shrouded heads IP 66 for equipped control stations IP 20 at the rear of the panel for contact blocks and one piece pilot lights Type 1, 2, 3, 3R, 3S, 4, 4X, 12, and 13
PAGE 90
Technical characteristics > CONTACT BLOCKS Screw and plug-in connection characteristics Data Standards > Rated insulation voltage 690 V AC 600 V AC IEC 60947-1 UL 508 > NC contacts Positive opening IEC 60947-5-1 > Rated impulse voltage Uimp 6kV 3 > Conventional thermal current in free air conditions AC15: 10 A DC13: 2,5 A > Electrical ratings Alternating current AC15 - A 600 Ue = 120 V, Ie = 6 A Ue = 240 V, Ie = 3 A Ue = 380 V, Ie = 1,9 A Ue = 480 V, Ie = 1,5 A Ue = 500 V, Ie = 1,4 A Ue = 600
PAGE 91
Technical characteristics > CONTACT BLOCKS Pin-style connection (for PCB) Data Standards > Rated insulation voltage 250 V AC 250 V AC IEC 60947-1 UL 508 > NC contacts Positive opening IEC 60947-5-1 > Rated impulse withstanding voltage Uimp 4 kV 3 > Conventional thermal current in free air conditions AC 15: 5 A DC 13: 1 A > Electrical ratings Alternating current AC 15 - B 300 Ue = 120 V, Ie = 3 A Ue = 240 V, Ie = 1,5 A Direct current DC13 - R 300 Ue = 125 V, Ie = 0,22 A Ue = 250 V, Ie = 0,1 A
PAGE 92
Technical characteristics > ONE PIECE PILOT LIGHT BA9S Characteristics Data Standards > Rated insulation voltage 400 V IEC 60947-5-1 > Rated impulse withstand voltage Uimp 4 kV IEC 60947-1 > Bulb rating 400 V max. - 2,6 W max. 240 V max. - 2,6 W max.
PAGE 93
Diagrams MECHANICAL OPERATION Back side view For 3 position selector switches Handle position (View from front of panel) 1 0 2 1 0 2 1 0 Non operated block Operated block 2 Contacts block actuation (View from front of panel) MECHANICAL OPERATION For Joysticks 2 positions 4 positions A O B 0 1 3 2 LM11 13 in 1 11 14 12 X LM11 23 in 2 21 24 X 22 0 X 1 3 2 X A C O B D LM11 13 in 1 11 14 LM11 23 in 2 21 24 X X 12 X 22 X PUSH-TO-TEST LED PILOT LIGHT DIAGRAMS Lamp-testing module