Owners manual

Page 6
Bad Elf GPS Pro+
Charge the Bad Elf GPS Pro+
The Bad Elf GPS Pro+ is charged via the mini-USB connector on the back of the
device.
Before using the Bad Elf GPS Pro, fully charge the device. To charge, simply use the
provided cable and plug the Bad Elf GPS Pro+ into any standard USB power source,
such as a computer, wall charger, or the included car charger. It takes up to 4 hours
to fully charge the Bad Elf GPS Pro+.
Power On the Bad Elf GPS Pro+
To turn it on, press and hold the Power Button for 3 seconds until the display shows
the splash screen.
Once powered on, the device is ready to accept incoming Bluetooth® connections
from your Apple device. Follow the pairing instructions below.
Download the Bad Elf GPS utility app and any other location-based apps you want
to use with your Bad Elf GPS Pro+.
In the meantime, the unit will start searching for GPS satellites. Once a GPS lock
is acquired, location data will be displayed on the LCD. The accessory will also
begin sharing received location data with any devices (and apps) that have been
connected via the Bluetooth connection.
Pair an Apple Device with the Bad Elf GPS Pro+
The Bad Elf GPS Pro+ only needs to be paired once with your iPod touch, iPhone,
or iPad. After your Apple device and Bad Elf GPS Pro+ are paired, they will connect
automatically when both units have their Bluetooth radios ON and are within range
of each other.