How-To Guide

Badge Messenger
Limited Warranty - Summary:
Badge Messenger warrants to you that this product
is free from defects in materials and workmanship
for a period of one (1) year from the original date
of purchase from Badge Messenger. See
support
.badgemessenger.com for product specific
warranty information, and to start or act on a
warranty claim. Scanning the QR code on your
Messenger with your smart phone will give you
instant details regarding your product and
coverage. Badge Messenger’s entire liability and
your exclusive remedy for any breach of warranty
shall be, at Badge Messenger’s option, to repair or
replace a functioning unit or refund of the purchase
price, when the hardware is returned to the
manufacturer. These warranty protections are in
addition to any local consumer protection laws.
Your warranty is void under these conditions:
• Physical Damage.
• Water Damage.
• Damage from extreme heat.
For warranty claim, send to this address:
Badge Messenger
Attn: Customer Service (warranty ticket number)
11 Industrial Blvd
Sauk Rapids, Minnesota 56379
Use Guidelines: Safe & Proper Use
of Your Messenger
Do not open or modify the product nor should you
attempt to service the product to avoid risk of
injury due to battery damage. Do not immerse
product in any liquid or expose to any heat or
moisture. If product is exposed to out of range
temperature, power off device until temperature
range has stabilized within the specified operating
temperature range.
Charging temperature range: 32°F to 113°F
Discharge temperature range: -20°F to 140°F
No charging permitted below freezing. Charging
and discharging at the high end of the temperature
range results in a shorter battery life.
This product is not a toy
and should not be handled
by children.
If product is operating improperly, please contact
Badge Messenger Customer support.
Completely charge your Messenger prior to first
use.
Power Off your Messenger:
Press and hold NO for 5-seconds to power off.
Powering On your Messenger:
Press and hold NO for 5-seconds to power on.
Charging your Messenger:
Power off and insert USB charger connector in to
the Messenger. Charge until the amber led goes
out.
Important Safety, Compliance and
Warranty Information
Improperly, or mistreated rechargeable batteries
may present a risk of leak, chemical burns, or
explosion and personal injury. Do Not open,
puncture, expose to conductive materials,
moisture, liquid, or heat above 130° F (54°C). Do
Not charge battery if it appears to be leaking,
discolored, deformed, or in any way abnormal. Do
Not leave your battery discharged or unused for
prolonged periods of time. Do Not short circuit.
Do Not allow children to play with the Messenger,
and be mindful of any strangulation hazard
related to the lanyard, if so equipped. Battery life
varies with usage. Non-operational batteries/units
should be returned to Badge Messenger for
recycling. Warning: Altering, modifying, or
changing the Messenger outside of normal
operation
may create a hazardous condition.
Avoid shock hazard when recharging battery by
charging away from any liquid source.
English
Read Manual before Product Use
Warning!
No User Serviceable Parts!
Battery is not user replaceable!
FCC Statement:
This Device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1)
This device cannot cause harmful interference, and 2)
this device must accept any interference received,
included interference that may cause undesired
operation. This equipment has been tested and found
to comply within the limits of Part 15 rules for a Class B
device. These limits are designed to provide reasonable
protection against harmful interference within its
operational environment. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used properly, may cause harmful
interference to radio communications. However there
is no guarantee that interference will not occur in any
particular installation. If this equipment does cause
interference to radio or television reception, which can
be determined by turning off and on the equipment,
the user is encouraged to try to correct the
interference by one or more of the following options:
• Re-orient or relocate the Messenger
•
Increase distance between equipment and Messenger
for help.
WARNING: Where shielded cables or accessories have
been provided with the product, or specified additional
components or accessories elsewhere defined to be
used with the installation of the product, they must be
used to ensure the compliance to FCC. Changes or
modifications made to the product could void your
right to use of the product.
We at Badge Messenger promote
Proper Storage and Recycling!
Please retain your packaging for future storage
and returning for recycling!
As many schools have a break period for
summer and the messengers are to be stored
for that time, the original packaging is
designed with the storage of your messengers
in mind. Proper storage consists of a complete
recharge (amber light goes out) with the
Messenger powered down, and placed within
the supplied packaging/box.
At the end of your messengers life we will
gladly accept them back for responsible
recycling. Many components in your
Messenger are recyclable and reusable. Also
the battery can be safely recycled. The
shipping back of the units are to be in the
original packaging as this method is tested safe
for transportation.
For any questions visit our website
www.badgemessenger.com/recycle
for instructions and assistance for proper
handling and shipping.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician