User's Manual
Table Of Contents
- DISCLAIMER
- QUESTIONS OR SERVICE ASSISTANCE
- PRODUCT IDENTIFICATION
- SCOPE OF MANUAL
- PRODUCT UNPACKING AND INSPECTION
- LICENSE REQUIREMENTS
- INSTALLATION TOOLS and MATERIALS
- INSTALLATION of BADGER ORION INTEGRAL TRANSMITTER and INDEX
- AMERICAN® GAS METERS
- Index Removal From an American Gas Meter
- ORION Installation Components for an American Meter
- Assemble the ORION Transmitter and Index
- Place the Cover Over the Transmitter and Index
- Final Assembly
- Drive pawl engagement and installation of index
- Index Installation
- Place four (4) screws into the transmitter
- Program the Transmitter
- APPENDIX
Installation Data
DISCLAIMER
The user/purchaser is expected to read and understand the information provided in this manual, follow any listed Safety Pre-
cautions and Instructions and keep this manual with the equipment for future reference.
Misuse, mishandling and/or inadequate maintenance may impair performance and/or compromise safety.
QUESTIONS OR SERVICE ASSISTANCE
If you have questions regarding the product or this document contact:
Badger Meter, Inc.
P.O. Box 245036
Milwaukee, WI 53224-9536
Telephone: (414) 355-0400, (800) 876-3837
Fax: (888) 371-5982
On the Web: www.badgermeter.com
or call your local Badger Meter representative.
PRODUCT IDENTIFICATION
Record the product identication numbers from the nameplate.
Transmitter
Model Number
Serial Number
Tag Number
The ORION® SE integral transmitter and index for gas meters is designed for use with an American brand of aluminum-case
residential gas meter.
SCOPE OF MANUAL
This manual contains installation instructions for the Badger® ORION® SE Integral Transmitter and Index for American Gas
Meters.
Throughout the remainder of this manual, all references to “ORION” describe the “Badger® ORION® SE”.
Proper performance and reliability of the ORION gas meter system depends upon installation in accordance with these in-
structions.
(8-10)
Page 5