User's Manual

Installation Data
Drive Pawl Engagement and Index Installation
1. Use care when handling the ORION endpoint and index to insure the endpoint rear drive pawl and the mating
drive pawls are not subjected to any physical abuse. Abuse may cause the spindles to become bent, misaligned or
otherwise inoperative.
When attaching an index to a ORION endpoint, make sure the index mounts securely to the endpoint. The front
and rear drive pawls must mate without causing any binding or potential for disengagement.
2. Align the two (2) screws in the endpoint holes.
On a TWO-FEET dial, engage the index drive pawl into the half round connection in the endpoint.
On a ONE-FOOT dial, place the index pawl hole into the pawl sticking out of the endpoint.
Half Round Connection
in Endpoint
Index Drive
Pawl
Endpoint
Pawl
Hole in
Index Pawl
(1-11)
Page 13