User's Manual
Installation Data
Placing a Two-Feet Dial
Align the rear endpoint drive pawl and the gas meter pawl. Place the four (4) ΒΌ-20 X 3/8" endpoint screws against the holes
in the gas meter.
Placing a One-Foot Index
Place the endpoint against the gas meter. Place the endpoint drive pawl so it is around the gas meter pawl.
Tighten the four (4) endpoint screws (20 in-lbs max).
Move the TWO-FEET or ONE-FOOT dial back and forth to verify pawl connections.
Endpoint
Pawl
Gas Meter
Pawl
Gas Meter
Pawl
Endpoint
Pawl
(1-11)
Page 15