User's Manual

Installation & Operation Manual
2. Strip the cable outer jacket to a length of 1.1 inches. maximum.
Figure 11: Stripped Cable Wires
3. Shorten the foil shield ush with the outer jacket.
4. Strip the ends of the six (6) wires to a length of 0.16 inch. Twist the conductors on each wire.
5. Shorten the drain/bare wire (no insulation) to 0.65 inches.
6. Insert the cable through the coupling sleeve.
7. Attach the wires to the female insert:
WIRE FEMALE INSERT CONNECTOR
White 4
Drain 8
Black 3
Blue 7
Red 1
Green 5
Brown 2
(1-11)
Page 11