User's Manual
Installation & Operation Manual
Software Conguration
The ORION SE Gateway Transceiver software conguration settings were preset prior to delivery. The following instructions
supply a basic overview for changing the network and gateway settings. Badger Meter suggests contacting customer service,
technical support at 1-800-876-3837, to verify proper settings during (re)conguration.
1. Open The GatewayCongure.exe software.
2. Select from the Gateway Type drop-down menu.
3. Select Serial from the Connection menu.
4. Leave the Cmd. Timeout set to 10.
5. Select the appropriate COM Port.
6. Select the appropriate Baud rate (9600 for serial, 115200 for USB).
7. Click on the Connect button.
For the TCP Connection:
8. On the GatewayCongure -Passkey window, leave the Use Default Passkey checkbox checked - or uncheck the box
and then type a new passkey in the Passkey eld.
9. Click the OK button.
(1-11)
Page 17