User's Manual

Page 34
1-11
Trimble® Ranger™
To change the direction of the meter reading, tap on the direction arrows (“>>”). The screen will display the direction of the
reading by showing an arrow pointing to the left next to the reading field. When you enter a meter reading now, the reading
will be shown on the display from right to left. Using the same example, if you entered 382 going from right to left (the arrow
pointing to the left), you’d see this screen:
In either case, when the meter reading is completely entered, select the “OK” RIGHT Soft Menu key. To cancel the entry, select
the “Cancel” LEFT Soft Menu key. To switch back to Left to Right manual reads, tap on the direction arrows (“<<”) again.
High and Low Limits for Manual Meter Readings
If the reading is within the high and low limits, the handheld will record the meter reading and advance the display to the
next meter. If the reading is above the high limit or below the low limit, the handheld will beep twice for high and three times
for low and tell you that the entered meter reading was high or low. It will ask you to re-enter the reading. This is what you
will see if you enter a reading that is above the high limit.