User's Manual

Page 35
1-11
Installation & Operation Manual
Here is what you will see if you enter a reading below the low limit.
Select the “OK” LEFT Soft Menu key and the Trimble Ranger will display the read screen again. Re-enter the meter reading and
press Enter.
If the second meter reading matches the first meter reading, the Trimble Ranger records the reading and displays the next
meter. If the meter readings do not match, the Trimble Ranger will alert you that the two readings are different and will return
to the read screen for this meter as if nothing happened.
In this case, the meter reading process begins again for this meter.
The method used to verify a high or low manual meter reading is controlled by one of the settings: ”High/Low Entry Disposi-
tion.” If ”Accept/Reject” is selected in the combo box, the above method of re-entering a manual meter reading is used to
verify the high or low reading value. If the box is not checked, the handheld will display the reading entered and ask if it is the
correct reading.