User's Manual

Page 38
1-11
Trimble® Ranger™
The settings to control these options are stored in the Utility Settings off of the Read Menu or Main Menu.
• Pressing the “U” key or tapping in the box will turn the No usage check on and off.
• Pressing the “R” key or tapping in the box will turn the Reverse Flow check on and off.
If the No Usage check is turned on, and the manual reading for a meter is the same as the previous reading, you’ll see a screen
like this.
Because the reading may be in error, you will be asked to verify the reading.
• If the ”Hi/Low Entry Disposition” is set to “Reentry Required” or “Reentry w/Cancel,” you will be asked to enter the
reading again.
• If ”Accept/Reject” is selected, you will be asked if the reading is correct.
Touch read meters and radio read meters will also show an alert message but will not require you to verify the reading.