User's Manual

Page 39
1-11
Installation & Operation Manual
If the Reverse Flow check is turned on, and the manual reading for a meter is lower than the previous reading, you’ll see a
screen like this.
Because the reading may be in error, you will be asked to verify the reading.
• If the ”Hi/Low Entry Disposition” is set to “Reentry Required” or “Reentry w/Cancel,” you will be asked to enter the
reading again.
• If ”Accept/Reject” is selected, you will be asked if the reading is correct.
Touch read meters and radio read meters will also show an alert message but will not require you to verify the reading.
Other Reading functions – The Reading Menu
Selecting the “Menu” RIGHT Soft Menu key from the Read screen will show you the other reading functions that can be per-
formed.
• Search “S”. Allows you to search for Accounts using various criteria.
• Manual Read “R”. Allows you to enter a manual read for the current account.
• View Hi/Low “V”. Shows you the current account’s Previous read, and Low/High threshold read values (if appropriate
permissions are set).
• Read Direction “D”. Reverse reading direction in the route (instead of first to last, direction is last to first). To go back