User's Manual

Page 46
1-11
Trimble® Ranger™
To enter a Reader Code, select the number of the code (either 1, 2, or 3 on the keypad or by tapping the appropriate box on
the screen) to display the choices for that code. You can select the “Cancel” LEFT Soft Menu key to cancel the entry of a reader
code.
Again, if you choose to clear a Reader Code entry, choose the blank line at the top of the list and press the “Enter” key.
If you have chosen a message, you might see a screen like this.
As was with the Trouble Codes, selecting the “Cancel” LEFT Soft Menu key cancels any changes you made, while selecting the
“OK” RIGHT Soft Menu key on the bottom right of the screen will accept the changes.
When the readings are unloaded, Badger Meter Reading Data Management Software will store and display the Reader Codes
and Trouble codes in the Customer Record for that meter.
You can use the Standard Reports to see any and all of the Reader Codes and Trouble Codes that were entered when reading
the meters.