User's Manual

Page 47
1-11
Installation & Operation Manual
Bookmark
The bookmark function allows you to mark a particular meter in the route as one you might wish to revisit later.
One common use of the bookmark function occurs when you come upon a flooded meter pit, and your pump is back in the
truck. You can set a bookmark at this meter and continue reading. Later, once you have the pump, you can search for the
meter(s) that is/are bookmarked, and return to them to continue your work.
To set the bookmark for the meter on the screen, press the function (Fn) key followed by the B key. You can also use the “B”
key or a double “B” key (“BB”) depending on the settings you have chosen. You’ll see the Bookmark flag in the upper left side
of the screen.
To clear a bookmark for the meter on the screen, press those same two keys again. The screen returns to the original state.
On the Read screen, you can press the “C” quick read key (or double-press it, depending on settings) to move from one book-
marked account to the next.
Skip
The skip function—if enabled in settings—is used to mark a meter as one at which a reading cannot be obtained at this time.
When a meter is marked as skipped, it is removed from the Unread Meter list. A route is considered completed once all me-
ters are read or skipped.
When you set a meter as skipped, the system will display either the Trouble Code or a Reader Code screens allowing you to
choose one of the conditions showing that the meter was skipped. When the route information is sent back to the Reading
System, the skipped code (either the Trouble Code or the Reader Code) will be processed.
To skip the meter showing on the screen, press the function (Fn) key followed by the “Z” key. You can also use the “Z” key or
a double “Z” key (“ZZ”) depending on the settings you have chosen. This will bring up either the Trouble Code screen or the
Reader Code screen (depending on how Skips are configured in your system). Choose the code for the appropriate skip rea-
son and press the Enter key. The meter will be marked as skipped, and the next meter to read will be displayed on the screen.
A skipped meter is shown on the screen like this.