User's Manual

Page 67
1-11
Installation & Operation Manual
Using the Programmer to start a Endpoint
If a Badger Meter ORION Endpoint is required to start its meter reading broadcast prior to registering usage, align the optical
port and the LED and touch the “S” key or tap the “Start” button on the screen.
Here’s what you would see if you started endpoint # 82397512.
Stopping a Endpoint
• To use the Programmer to Stop the endpoint’s meter reading broadcast, align the optical port and the LED press “T”
key or tap the “Stop” button on the screen.
Here’s what you would see if you stopped endpoint # 82397512.