User's Manual

Page 71
1-11
Installation & Operation Manual
If you wish to look for a reading from a specific Badger Meter ORION receiver, use the RF S/N tab to choose and enter the de-
sired serial number. The RF* tab is used when you wish to monitor all of the ORION endpoints in the area.
• S/N field : The ORION Serial Number of interest. You can enter this number via the keypad on your Trimble Ranger.
• MT field : Displays the Meter Type of the Serial Number once it has been heard.
• Δt : The total number of seconds spent waiting for the next transmission from the specified S/N.
• Dur. : The total number of seconds listening for the specified S/N.
• Tot. # : Total number of transmissions heard, regardless of S/N (so the entered S/N was heard 2 times, but there were
9 total transmissions heard—the other 7 transmissions were from different S/Ns).
• S/N # : Total number of transmissions heard from the specified S/N.
• Stop “S” button : Will stop collecting readings.
• Reset “E” button : Will reset all fields except the S/N field.