User's Manual
Page 42
12-10
ORION
®
Reading Mobile Software (ORS)
Add/Edit Reader Codes
1. To report non-trouble information about a meter, click one of the Select buttons in the Reader Code area (see Figure
34 on page 39).
Figure 37: Select a Comment
Note: You can select up to three comments and send those comments back to the oce for a given meter.
Note: The Reader Codes are also dened in the Reading Data Management Software and sent to ORS.
2. To set a Reader Code, select the code and then select OK.
Note: When the readings are sent back to the Reading Data Management Software, reports of meters containing
these codes can be generated to help identify problem meters.