User's Manual

Page 61
12-10
Installation & Operation Manual
The following observations can be made audibly or visibly:
Figure 54: Geocoding
Once you click the GEOCODE button, you are slowly driving the route under 10 MPH, and a meter reading comes in that
requires a location, you will hear a sound and the map display will show a new green circle for the meter that was just read.
Each time you receive a meter reading from a meter that requires a location, you will hear the sound and see another green
circle. In the background, the software is ne-tuning the location information for meters that require locations when a
stronger meter reading transmission is received. However, you will not hear or see anything while that is happening. Once
you have driven every street where coordinates are needed, you can set the GEOCODE setting to OFF, which will turn o the
assignment of coordinates and return to normal operation.