User's Manual

Page 64
12-10
ORION
®
Reading Mobile Software (ORS)
Once the route is loaded and you click Start Reading Meters, the following prompt is displayed to conrm your intention to
collect out-of-route meter readings.
Figure 57: Confirmation Prompt
8. If you wish to collect Out-of-Route Readings, click Yes.
9. If you click NO, the Out-of-Route processing is turned o automatically.
Note: You do not need to proceed to the Setup screen to turn o the Out-of-Route Reading feature.
Note: When reading Out-of-Route meters the status bar at the bottom shows the status of the route as
well as the number of meters read that were not in the route.
Figure 58: Status Bar