User's Manual

ORION® Water Endpoint
Figure 8: Remote Box Enclosure Mounting
When inserting the ORION endpoint into the Remote Box Enclosure, make certain that the at side of the endpoint is facing
the back of the enclosure or toward the installer (Figure 8). When installing, the endpoint antenna must be mounted toward
the top of the enclosure, between the security ribs. Note that the arrow on the back of the Remote Box Enclosure points
up toward the top of the assembly. When installing the Remote Box Enclosure to a wall, it must be mounted with the arrow
pointed up (toward the sky).
Figure 9: Endpoint Orientation
Top
3 Security Ribs
Hole in Bottom
2 Strain Relief Tabs
Transmitter Antenna
Security Ribs
Flat Side
Arrow
Page 10
(12-10)