User's Manual

Installation & Operation Manual
ELECTRICAL INSTALLATION
AC Power
Badger Meter provides an AC-to-DC power supply that plugs into a standard three-prong 120V AC outlet. If powering the
network gateway transceiver directly via DC power, please refer to the DC power information on page 17.
Figure 9: 120V AC Power Supply with Power Cord
M12 Connector Assembly
NOT:N Use only approved Badger Meter power cable, 100 foot (66233-015) or 300 foot (66233-017), for this assembly.
Tools and Materials
• M12 plug, 8-conductor connector (66525-002)
• Badger Meter power cable, 100 feet or 300 feet with 308 in-line connector end
• 308 in-line connector anti-tamper collar
• Coax stripper (customer supplied)
• Wire stripper for 22 AWG wires (customer supplied)
• Precision slotted screwdriver with blade size of 2.0 millimeter (0.079 inch) (customer supplied)
M12 Plug Connector Part Names
Figure 10: M12 Plug Connector Parts
1. Push the connector parts onto the power cable in the following order: pressure nut, clamping cage, cable seal, sleeve
with O-ring and nally, the coupling sleeve.
Female Insert Coupling Sleeve
Sleeve
w/O-ring
Cable
Seal
Clamping
Cage
Pressure
Nut
Page 11 June 2012