User's Manual

ORION® SE Network Gateway Transceiver
RJ45 Plug Assembly (for LAN connectivity only)
Required Supplies:
• RJ45 Plug Assembly (66527-001)
• Ethernet cable cordset using outdoor-rated Cat.5e cable and RJ45 jack (customer supplied)
• Wrenches – 1-1/16 inch (customer supplied)
Figure 19: RJ45 Plug Components
1. Feed the cordset cable through the dome nut end of the cable gland.
2. Push down the RJ45 plug latch and place it inside one half of the insulator insert. Refer to Figure 20.
RJ45 PLUG
LATCH
HALF INSULATOR
INSERT
HALF INSULATOR
INSERT
RJ STOP®
PATENT
AUDIBLE
LOCKING
Figure 20: Insulator Assembly
3. Attach the other half of the insulator insert as shown. An audible click will sound when the connection has been
made.
Cable Gland
Nut
Dome Nut
Metallic Housing Insulator Insert Halves Cable Gland
Page 18 June 2012