User's Manual

ORION® Water Endpoint
UNRELEASED DRAFT COPY ONLY
4. With the installation bracket in one hand and the housing in your other hand, hold the bracket still and twist the
housing approximately 1/4 turn clockwise until it clicks and locks into place.
Figure 16: Bracket and Housing Connection
To install the endpoint assembly, follow these steps.
1. Align the ORION endpoint and the installation bracket with the antenna facing upwards (Figure 17).
2. Using two customer-supplied screws, secure the endpoint and installation bracket assembly to a non-metallic joist
or wall.
Figure 17: Endpoint Positioning
Page 16
5-11