User's Manual

ORION® Water Endpoint
Figure 8: Remote Box Enclosure Mounting
2. Place the endpoint into the ORION Remote Box Enclosure as shown in Figure 9. To ensure maximum endpoint
performance, it is important to mount the ORION endpoint in the proper orientation, with the endpoint antenna up
and ORION endpoint IR communication port and wire down.
3. Make certain the at side of the endpoint is facing the back of the enclosure, or toward the installer, when
inserting the ORION endpoint into the Remote Box Enclosure (Figure 9). When installing, mount the endpoint
antenna toward the top of the enclosure, between the security ribs.
NOTE: The arrow on the back of the Remote Box Enclosure points up, toward the top of the assembly.
When installing the Remote Box Enclosure to a wall, mount it with the arrow pointed up (toward the sky).
Figure 9: Endpoint Orientation
Top
Hole in Bottom
2 Strain Relief Tabs
3 Security Ribs
Endpoint Antenna
Security Ribs
Flat Side
Arrow
/" Wide Slot
Page 12
11-11