User's Manual

ORION® Water Endpoint
Remote Installation Bracket Kit (SE, ME and CE Endpoints)
The following instructions are provided to properly install an ORION endpoint in any indoor, outdoor or pit application. Prior
to beginning the installation procedure, ensure that the following items are available.
• Remote Installation Bracket Kit
• Two customer-supplied screws
• Screwdriver and drill
The Remote Installation Bracket securely mounts an ORION endpoint. For non-submerged indoor and outdoor applications,
the installation bracket can also be used to enclose gel-cap, wire-splice connections to protect them from the environment
and to prevent tampering in any indoor or outdoor non-metallic joist, wall or pit application.
To install the bracket to the housing, follow these steps.
1. Place the encoder cable harness through the slit in the bracket with the screw holes at the bottom.
NOTE: Carefully slide the cable harness through the slit in the bracket.
Figure 12: Cable Harness Threading
Slit
Screw Holes
.18" diameter
Page 14
11-11