User's Manual

ORION® Fixed Network – Metal Lid Endpoint
IDENTIFICATION
The ORION Fixed Network - Metal Lid endpoint is a three-wire metering endpoint device that requires connection to an
encoder to complete the assembly. The endpoint and compatible Badger Meter encoders are shown below.
Each ORION endpoint has a unique numeric serial number on the tag attached to the wire harness and etched on the side of
the endpoint housing. Each Badger Meter encoder is identified on the face of the register with an assembly number, unit of
measure and meter model.
ORION Fixed Network - Metal Lid Endpoint
High Resolution LCD Encoder (HR-E LCD) E-Series® Ultrasonic Meter with
High Resolution LCD Encoder
High Resolution 8-Dial Encoder (HR-E) Absolute Digital Encoder (ADE
®
) Recordall® Transmitter Register (RTR
®
)
Figure 1: Endpoint and encoders
Page 6 May 2014
draft