User's Manual

Installation Manual
Backhaul Antenna Bracket
When shipped, the backhaul antenna
bracket (PN: 67536-001) is mounted to the
bottom of the mounting bracket with two
locknuts (PN: 67624-001). The mounting
holes are indicated in Figure 8.
Other holes on the bracket can be used
to accommodate remote installation. For
more information, refer to "Remote Antenna
Installation" on page 34 in the Appendix.
A backhaul antenna can be connected to
the bracket with either end up. However,
the antenna must always be connected at
the narrow end, hanging away from the
bracket as shown in Figure 9.
Figure 8: Backhaul antenna bracket
Correct Antenna Mount Correct Antenna Mount Incorrect Antenna Mount
Figure 9: Backhaul antenna mounting
X
Page 13 October 2013