User's Manual

ORION® SE II Network Gateway Transceiver
OTE:N Installation of banding mounting requires the use of the BAND-IT tool shown below (PN: 66042-006) or equivalent
BAND-IT tool as recommended by BAND-IT.
Figure 14: BAND-IT tool
1. Locate the BAND-IT tool and supplied installation instructions.
2. Follow the BAND-IT-supplied installation instructions enclosed with the BAND-IT tool for attaching the gateway
transceiver to a pole.
3. Using a 1/2 inch wrench, apply the recommended torque for the 5/16-24 screw that attaches the gateway bracket to
the BAND-IT banding. The recommended torque is 144…168 inch-pounds (12…14 foot-pounds).
Figure 15: Gateway shown with BAND-IT mounting hardware
Page 16 October 2013