User's Manual

ORION® SE II Network Gateway Transceiver
GPRS DUAL BACKHAUL CONFIGURATION
ORION SE II network gateway transceivers are configured to allow a dual backhaul connection so you can switch from GPRS to
an alternative LAN backhaul, if necessary, using the RJ45 plug assembly included with the transceiver.
The GPRS connection can remain in place when the LAN connection is set up. Refer to "LAN with 120V AC Power Source" on
page 19 for the LAN installation diagram.
OTE:N The gateway will need to be reprogrammed for a LAN connection. Refer to the Gateway Configuration Software
manual available at www.badgermeter.com, for programming instructions.
Page 30 October 2013