User's Manual

Installation Data
Remote Installation
Remote Wall Mount Box Enclosure Kit (SE, ME and CE Endpoints)
The ORION Remote Wall Mount Box Enclosure Kit is for use with either the Recordall Transmitter Register (RTR) or Absolute
Digital Encoder (ADE) stepped tube and threaded tube ORION endpoint for remote mounting applications. The wall
mounted Remote Box Enclosure is designed for mounting ORION endpoints in indoor or outdoor environments and also
provides an environmentally protected area for gel splice connections (if needed) to be maintained inside the enclosure.
The ORION Remote Wall Mount Box Enclosure Kit is recommended for proper mounting of the ORION endpoint for remote
applications.
Remote Box Enclosure
ORION CE RTR Endpoint
Figure 7: Enclosure and Endpoint
To install an ORION endpoint using the Remote Box Enclosure, follow these steps.
1. Flip the Remote Box Enclosure over and look inside to verify the proper orientation. Locate the three security ribs
inside the Remote Box Enclosure to determine the top of the enclosure.
The bottom of the Remote Box Enclosure is identied by the two strain relief tabs located on both sides of the
enclosure housing and the hole in the bottom of the enclosure that allows access to the endpoint IR communication
port without having to disassemble the unit (Figure 8).
11-11
Page 11