Data Sheet

ManualsBrandsBADGER METER ManualsSensorsFlow meter 1 pc(s) 2008 4F22 Operating voltage (range): 5 - 24 Vdc Reading range: 1 - 25 l/min

Turbine meter

Vision Series 2000

TUR _VIS_2000_DB_02_2257 (January 2021)

Data sheet

DESCRIPTION

The small turbine meter VISION measurement technology is

ideal for the accurate measurement of low viscous and non-

aggressive fluids. The VISION 2000 series is most suited for

the measurement of flow rates from 0,5 to 35 l/min. The

turbine meters can be mounted in any position.

MEASURING PRINCIPLE

Turbine meters are indirect volumetric meters. When the

fluid passes through, a rotor is activated and the movement

is either electronically or mechanically transmitted outside.

The rotor is turned by the fluid force, proportional to the flow

rate. A Hall effect sensor detects the passage of the rotor and

supplies pulses, which can be utilized for digital or analogue

signal processing. The generated pulses are specified as the

K-factor. The large number of pulses provides high

resolution. As the mass of the turbine is very small the

response time is very short. It is not necessary to install a

straight length of pipeline at the upstream side of the meter.

SPECIFICATIONS

Type

VISION 2006

VISION 2008

Performance

Flow rate

0.5 – 35 l/min

Accuracy

± 3% of reading

Repeatability

< 0.5% under the same operating conditions

Operating temperature

-20°C to 100°C

Operating pressure rate

max. 25 bar; with push-fit connector 10 bar (+20°C) and 7 bar (+65°C)

Burst pressure

200 bar

Summary of content (8 pages)

PAGE 1
Turbine meter Vision Series 2000 DESCRIPTION The small turbine meter VISION measurement technology is ideal for the accurate measurement of low viscous and nonaggressive fluids. The VISION 2000 series is most suited for the measurement of flow rates from 0,5 to 35 l/min. The turbine meters can be mounted in any position. MEASURING PRINCIPLE Turbine meters are indirect volumetric meters.
PAGE 2
Turbine Meter – Vision series 2000 Pick up Pulse sensor Input power Output signal Power consumption K-factor Material Housing Hallsensor 5 – 24 VDC Open collector (NPN sinking) @ max. 20 mA, 1-2.2 kOhm pull up resistor required approx.
PAGE 3
Data sheet PRESSURE DROP January 2021 TUR_VIS_2000_DB_02_2257 Page 3
PAGE 4
Turbine Meter – Vision series 2000 DRAWINGS DIN connector Round cable 2.8 17 12 12 12 12 55 17 17 55 20 (+) Red 5-24 VDC ca. 32 G 3/8“ or 3/8“ NPT ca. 27 G 3/8“ or 3/8“ NPT (25) 7 ca. 54 20 (+) 5-24 VDC (-) 0 VDC (-) Black 0 VDC R = 1-2.2 kOhm ( ) Brown Output ( O-ring and round cable ) Output O-ring and DIN connector 2.8 17 20 ca. 54 7 2.8 ca. 32 (25) Ø 16.7 Ø 14.2 ca. 27 O-ring 14x1.78 Ø 14.2 Ø 16.7 2.6 2.6 O-ring 14x1.78 2.
PAGE 5
Data sheet Push-fit (DN10) and DIN connector (26) Ø 16.4 81.2 ca. 94 Flow direction Tube DN10 Tube DN10 6.4 ca. 33 7 ca. 54 2.8 (+) 5-24 VDC (-) 0 VDC R = 1-2.2 kOhm ( ) Output 17 Push-fit (3/8”) and DIN connector 81.2 ca. 94 Flow direction ca. 33 Tube DN 3/8“ Tube DN 3/8“ 6.4 (26) Ø 15,93 7 ca. 54 2.8 (+) 5-24 VDC (-) 0 VDC R = 1-2.
PAGE 6
Turbine Meter – Vision series 2000 Push-fit (DN10) and round cable 81.2 ca. 94 Flow direction Tube DN10 Tube DN10 6.4 ca. 24 Ø 16.4 ca. 30 (+) Red 5-24 VDC (-) Black 0 VDC ( ) Brown Output 20 Push-fit (3/8”) and round cable 81.2 ca. 94 Flow direction Tube DN 3/8“ Tube DN 3/8“ 6.4 ca. 24 Ø 15.93 ca.
PAGE 7
Data sheet ELECTRICAL WIRING Hall sensor (+) 5 – 24 VDC (-) 0 VDC R = 1-2 2 kOhm ( ) Output Cable connection Faston-Connector brown / Output (⎍) Output (⎍) black / 0 VDC (-) 0 VDC (-) red / 5 - 24 VDC (+) 5 - 24 VDC (+) ORDERING MATRIX - VISION 2000 IN TROGAMID Select process and electrical connection Mechanical connector: VISION 2008, G 3/8" VISION 2008, NPT 3/8" VISION 2008, O-Ring VISION 2008, Hose nipple VISION 2006, G 3/8" VISION 2006, NPT 3/8" VISION 2006, O-Ring VISION 2006, Hose nipp
PAGE 8
Turbine Meter – Vision series 2000 ORDERING MATRIX - VISION 2000 IN FIBERGLASS Select process and electrical connection Mechanical connector: G 3/8" Hose nipple Integrated Push-fit connection tube 3/8" Integrated Push-fit connection tube nominal 10 mm Code 66122 56139 66131 66133 Electrical connection: DIN connector Cable – select cable length, see option -163 -165 Turbine model: VISION 2008 VISION 2008 VISION 2008 VISION 2008 -4F17 -4F22 -4F44 -2F66 Option cable length: 1 m (standard) 2m 3m Examples