User's Manual

Due to continuous research, product improvements and enhancements,

Badger Meter reserves the right to change product or system specifications

without notice, except to the extent an outstanding bid obligation exists.

Please see our website at

www.badgermeter.com

for specific contacts.

BadgerMeter,Inc.

P.O. Box 245036, Milwaukee, WI 53224-9536

(800) 876-3837 / Fax: (888) 371-5982

www.badgermeter.com

TESTING

After all connections have been made from the remote module to the

remote cable and from the remote cable to the ADE, the testing of the

complete BadgerTouch remote system can begin. To perform the test,

the Symbol handheld data collector can be used. The reading unit

should be placed on the remote module and the meter reading

collected. This should correspond to the reading on the meter odom-

eter stack.

Recordall

, RTR

and Read-o-Matic

are registered trademarks of Badger Meter, Inc. TORX

is a registered trademark of Camcar, Division of Textron, Inc. ADE™ and BadgerTouch

are

trademarks of Badger Meter, Inc.

LICENSE REQUIREMENTS

The device complies with Part 15 of the FCC Rules. Operation of this

device is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undes-

ired operation. Any changes made by the user not approved by Badger

Meter can void the user's authority to operate the equipment. No

license is required by the utility to operate a BadgerTouch Meter

Reading System.