Flow Instrumentation PFB Round Fire Pump System 2500 2000 3000 GPM FM APPROVED 3500 1500 1000 PFA-XXX X inch 250 SWP X/XX S/N AXXXXXXX PTT-UM-00510-EN-02 (April 2014) 4000 User Manual
Flow Instrumentation, PFB Round Fire Pump System LOCATION INSTRUCTIONS Straight pipe requirements: Accuracy is affected by the piping configurations due to the disturbances of the flow profile. A fully developed symmetrical flow profile is achieved with the minimum upstream and downstream recommended lengths.
User Manual INSTALLATION INSTRUCTIONS • The primary station can be installed in any position on vertical or horizontal lines. However for best results on horizontal liquid lines where the risk of air/gas entrapment in the water tubing is prevalent, install element with the head under the horizontal center line. • The Preso primary element is bidirectional. However, make sure head is parallel to the pipe run. • For pipes measuring 1-1/4" primary element, MNPT and may be installed in any direction. 1.
Control. Manage. Optimize. PRESO is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. © 2014 Badger Meter, Inc. All rights reserved. www.badgermeter.