Manual
Page 2 Form #04-VAM-UM-00229 09/12
I INTRODUCTION
The Flow-Alert ow meter combines the rugged proven technology of a
direct reading, piston-type, variable area ow meter, coupled with electri-
cal contacts utilized to signal at selected ow rates. This combination is
sealed against industrial contamination by a NEMA 12 and 13 (IP52/54)
rated enclosure.
This product provides a local ow indication and automatically signals the
operator or PLC if ow is too high or too low.
Uses of the Flow-Alert ow meter include: bearing lubrication, case drain
verication, gun drill cooling, pump ow conrmation, etc.
FLOW-ALERT
FLOW SWITCH
6000 PSI / 414 BARS MAX
GPM LPM
OIL
FIGURE 1 FLOWALERT FLOW METER