Instruction Manual

Electronic Preset Meter Model EPM-3, RF 2.4 GHz
TROUBLESHOOTING
Pressurized Equipment
Relieve the pressure prior to checking or repairing the meter. Make sure all valves, controls and pumps are operating correctly.
Symptom Possible Cause Remedy
Battery Icon is
displayed
Batteries are low Replace batteries
Display Blank Meter asleep Press RESET button
Loose battery connection • Remove battery pack and check battery connection
• Press RESET button
Batteries dead • Replace batteries
• Press RESET button
Meter does not latch
for batching
Meter not in AUTO mode Press AUTO button and program batch size
Meter not reset after prior batch Press RESET button
Low batteries • Check for battery icon
• Replace batteries
• Press RESET button
Slow or no fluid flow Filter is clogged Clean or replace the filter in the swivel nut
Pump pressure is low Turn up the pump pressure
Foreign material is jamming meter Contact your local distributor for repair
Meter inaccurate Scale factor not correct for fluid Enter program mode, check and reset program factor
Page 24 November 2012