Manual

MASTER KEYPAD
The Master Keypad acts as the communications director for the RF communications. It handles all communications between
the Dispense Keypads and the PC or Host. There are no operator menus associated with the Master Keypad—only supervisor
menus for setting up the system or creating reports.
The remainder of this document shows only the actual display, not the entire keypad.
To gain access to the supervisor menus, the supervisor PIN has to be entered. The default PIN is 0001 at initial power-up.
System Version Screen
16aug2012 08:35
V3.00
The standard screen shows the system date and software version
number. The display will alternate between the standard screen and
the Enter Pin Number screen. The Enter Pin Number screen is used to
access the supervisor menus.
16aug2012 08:35
V3.00
N
OTE:N An "N" displayed in the lower left-hand corner of the system
version screen indicates a Radio Network error. See “Radio
Status” on page 17 to check the source of the error.
Settings Overview / Supervisor Menus
The following changes can only be made at the Master Keypad in the setup mode. All other settings can be changed by using
the FMS software.
Enter PIN Number
Enter Pin No.
- - - -
To access the setup mode:
Enter the supervisor PIN number and press ENTER.
The default PIN is 0001 at initial power-up.
Initialization (INI) Menu
Select
INI CNF DK REP
The INI menu is used to set the system’s date and time.
Set System Time
Enter time
--:--
To change or set the system time:
1. Select the INI menu and press ENTER.
2. Use the numeric keys to set a 24-hour military time of day.
3. Press ENTER to save the setting and advance.
Set System Date
Enter date
--/jan/----
Enter date
19/aug/2012
To change or set the system date:
1. Use the numeric keys to enter the two-digit day.
The cursor automatically moves to the month.
2. Press the SCROLL key to select a month.
3. Use the numeric keys to enter the four-digit year.
4. Press ENTER to save the setting.
User Manual
Page 11 July 2014