Manual

Conguration (CNF) Menu
Select
INI CNF DK REP
The CNF menu is used to set the system’s operation modes and
archiving methods.
Order List
Not Empty
If you see the message “Order List Not Empty," you have to clear the
transactions in the Master Keypad (CNF Menu).
Clear Transacts
YES / NO
Use the SCROLL key to move the cursor to either YES or NO and
press ENTER.
Confirm Clear
YES / NO
Use the Scroll key to move the cursor to either YES or NO and
press ENTER.
System Reset
The System Reset allows a supervisor to reset all configuration parameters to default values.
System Reset
YES / NO
1. Use the SCROLL key to move the cursor to either YES or NO.
Confirm Reset
YES / NO
a. If you select YES, the keypad asks you to Confirm Reset.
b. If you select NO, the keypad advances.
3. Press ENTER.
Keypad Timeout
• Timeout parameter corresponds to the time it takes to validate after all dispense order data has been entered. If the Enter
button is not pressed within the time allocated, the keypad display goes back to initial menu and the input data is erased.
• The Keypad Timeout is between zero to 255 seconds (0 = no timeout) and the default for this feature is 10 seconds.
Keypad timeout
16-
1. Press the BACKSPACE key to erase the current setting.
2. Type in the new setting.
3. Press ENTER to advance.
Buzzer
This screen provides a user with the option to have a beep on every key entry. The default is YES.
Buzzer
YES / NO
1. Use the SCROLL key to move the cursor to YES or NO.
2. Press ENTER to advance.
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 12 July 2014