Manual

Test Communication (DK) Menu
Select
INI CNF DK REP
The DK menu is used to check the communication between
all keypads.
Test All DKs
YES / NO
Use the Scroll key to move the cursor to either YES or NO and press
ENTER.
Three Dispense Keypads are set up in the following example. Each "–" (dash) stands for a Dispense Keypad.
Start DKpd Test
Press Enter
Press ENTER to begin the test.
Results 1-16
OOK-------------
Keypad 3 - No Connection
Keypad 2 - Detected
Keypad 3 - Detected
N=Network Error, T=Timeout
Three Dispense Keypads are set up in this example.
In the following examples, each "–" (dash) stands for a
Dispense Keypad. Press ENTER to display these results.
Results 17-32
----------------
Results 33-36
----
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 14 July 2014