Manual

Radio Power
Select
ADR NWK PWR STA
1. Use the SCROLL key to move the cursor to PWR.
2. Press ENTER to display the Radio Power Level screen.
RADIO PWR LEVEL
20 dBm
3. Press ENTER to return to the selection screen.
Radio Status
The Radio Status options are:
• NWK CONNECTED – The network is connected and operational.
• SERIAL ERROR – There is a radio communication error on the serial bus between the keypad and the radio.
Select
ADR NWK PWR STA
1. Use the SCROLL key to move the cursor to STA.
2. Press ENTER to display the Radio Status screen.
RADIO STATUS
NWK CONNECTED
3. Press ENTER to return to the selection screen.
Change Channel
The Change Channel option is used to select a different RF channel if the current channel is noisy.
Select
CHA ... ... ...
1. Use the SCROLL key to move the cursor to CHA.
2. Press ENTER to display the Radio Network screen.
RADIO NETWORK
CHANNEL CHANGE
3. Press ENTER to select a new channel.
RADIO COMMAND
SUCCESS
4. The screen displays the radio command status.
User Manual
Page 17 July 2014