Manual

Buzzer
The buzzer beeps each time you press a button. You can turn off the sound. See Global Keypad Settings.
Auto Override
Activates the system Auto Override feature in all keypads so users can dispense WOs when the Master Keypad is not
operational. No supervisor intervention is required. Available with v3.X firmware only. After five failed MK communication
attempts, the Auto Override feature automatically puts the keypad in system override mode.
1. Use the SCROLL key to move the cursor to either YES or NO.
2. Press ENTER.
Batch Quantity Locked
With the Batch Quantity Locked, you cannot change the batch quantity
that was entered on the work order. If the work order has a batch
quantity of zero, you can change the batch quantity.
Hose ID First
Used for HOST communication option only.
Selected product ID will be sent to the HOST.
Delete Prepared WOs (MET) Menu
Work orders that have been entered at a keypad are stored until they are picked up by the appropriate meter (by pressing
RESET at the meter). Meanwhile, the meter is locked for other dispenses.
Select
CNF MET REP 190
The MET menu is used to delete prepared work orders and release the
meter for new work orders.
1. Use the Scroll key to move the cursor to either YES or NO.
2. Press ENTER.
Reset All Hoses
Press Enter
3. Press ENTER.
Auto Override
YES / NO
Batch Qty Locked
YES / NO
Hose ID First
YES / NO
Init All Hoses
YES / NO
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 20 July 2014