Manual

RADIO ADDRESS
01:80:A5:63
3. Press ENTER to display the Radio Address screen.
4. Press ENTER to return to the selection screen.
Radio Network
The Radio Network default is zero. You need to change this setting only if you have multiple RF FMS systems. All
RF Meter/Hose Radio Network settings must match the Master Keypad and Dispense Keypad settings.
Select
ADR NWK PWR STA
1. Use the SCROLL key to move the cursor to NWK.
2. Press ENTER to display the Radio Network screen.
RADIO NETWORK
0--
3. Press ENTER to return to the selection screen.
Radio Power
Select
ADR NWK PWR STA
1. Use the SCROLL key to move the cursor to PWR.
2. Press ENTER to display the Radio Power Level screen.
RADIO PWR LEVEL
20 dBm
3. Press ENTER to return to the selection screen.
Radio Status
The Radio Status options are:
• NWK CONNECTED – The network is connected and operational.
• SERIAL ERROR – There is a radio communication error on the serial bus between the keypad and the radio.
• NWK DOWN – There is no network within the range of the Dispense Keypad.
• NWK LOST – The network connection is currently unavailable.
Select
ADR NWK PWR STA
1. Use the SCROLL key to move the cursor to STA.
2. Press ENTER to display the Radio Status screen.
RADIO STATUS
NWK CONNECTED
3. Press ENTER to return to the selection screen.
User Manual
Page 23 July 2014