Manual

DISPENSE PROCESS
Schematic Overview
Enter WO No.
123A2--------
-
Enter Hose
02-
Quantity
3.0-
Enter for
Dispense
External validation
By FMS Software (PC)
Or Host (DMS)
Enter PIN No.
----
WO Valid. P
C
YES / NO
Hos e ID Firs
t
YES / NO
WO Valid Host
YES / NO
Order stored in Dispense Keypad
until the meter RESET button is pressed.
Starting a Work Order
Enter Pin No.
- - - -
1. Enter your PIN number and press ENTER.
To start a work order, the mechanics or users must enter their PIN to access the system.
Enter WO No.
- - - -
2. Enter an alphanumeric number (max. 16 characters) and press
ENTER.
In the operation modes WO Validation HOST or WO Validation PC (see “Work Order Validation” on page 13) the entered WO
number will be compared with the numbers set in the system, which are defined in Global Keypad Settings.
Alphanumeric Keypad
To change from the numeric to the letter keypad, press the equivalent key for at least 3 seconds until the desired letter is
shown.
Additional Free Fields
These optional fields are only shown if they have been enabled (defined in Global Keypad Settings).
Free Alphanumeric
- - - -
3. Enter alphanumeric characters and press ENTER.
Can be used, for example, for the licences plate number.
Free Numeric
- - - -
4. Enter an alphanumeric number (max. 16 characters) and press
ENTER.
Can be used, for example, for the actual mileage.
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 26 July 2014