Manual

EPM3 RF METER
The meter is equipped with RF communications to communicate dispense authorization and result information. Once a work
order has been set up, the operator simply pulls the trigger and the authorized amount of fluid for that meter will dispense.
The valve will automatically shut off when the full quantity has been dispensed. A Top Off feature allows additional quantities
to be dispensed and tracked after the valve closes. Upon completion of the dispense effort, the valve locks, prohibiting any
unauthorized dispense.
Key Description
The following keys (except for RESET and SHUT-OFF) are only active in the AUTO mode (or Manual mode).
10, 1, 0.1 Used to enter the dispense quantity to be used.
In operational mode it shows the five latest
dispensed amounts.
TOTAL Used to display the accumulated total of fluid
dispensed, as well as the resettable total when
held for 3 seconds.
AUTO Used to enter and exit the auto mode when RF
communications are not available.
RESET • Used to accept a dispense order from the
keypad.
• Used in normal operating mode (RF, manual
or auto) to clear the previously programmed
batch and to reset the meter.
• Used to reset the resettable total dispensed
while pressing the TOTAL button.
SHUTOFF
or
STOP
Used to stop the flow manually through an
electrical override.
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 28 July 2014