Manual

Master Keypad Settings
COM Port Select the COM port on the PC for the serial connection to the Master Keypad. To change, simply
click on the drop down and select the appropriate COM port.
Buzzer To activate the key click buzzer, check the box next to the Buzzer field.
Adding a Dispense Keypad
1. From the Keypad and Hoses screen, click ADD KEYPAD.
2. Enter the Dispense Keypad address found on the back of the keypad. Use only
the last 8 characters as shown here:
Keypad address
3. The ID eld automatically displays the next available sequential number.
4. Click SAVE.
Adding Hoses
Once you have added a keypad, you can begin adding hoses associated with it. You can also enter hoses not associated with
any keypad. You can drag and drop hoses to a keypad or between keypads.
To add hoses, fill in the information at the bottom right-hand corner of the Keypad
and Hoses screen:
1. Enter the hose ID found on a tag on the meter.
2. Enter the hose Address.
3. Enter the Tank the uid will be dispensed from.
4. Enter the dispenser Units of measure of the meter.
5. Click SAVE.
After the hose is added, it will appear under the Unused Hoses section or under the selected keypad.
Associating an Unused Hose with a Keypad
To associate an unused hose with a keypad:
1. Drag and drop the hose from the Unused Hoses section to the keypad section.
OR
2. Move it manually by selecting the hose(s) from the list on the right and
assigning them to keypads using the drop-down next to the Move Hoses to:
eld.
To delete a hose, select it on the left and click the DELETE HOSE button.
User Manual
Page 43 July 2014