User Manual

Installation & Operation Manual
Creating or Deleting an RF Meter/Hose (Meter and Hose are Synonymous)
This set of screens allows a supervisor to create or delete RF Meters/Hoses from the keypad.
• The RF Meter/Hose identification number is listed on the RF Meter/Hose under the battery pack or on an attached tag.
• The RF Meter/Hose Address identification number format is 10 decimal digits (X.XXX.XXX.XXX). The Hose Prefix number
format is 8 hexa-decimal (0-9, A-F) digits (XX.XX.XX.XX). Leading zeros must be entered.
• Maximum of 30 RF Meters/Hoses in the system.
• Initially, the RF Meter/Hose address list is empty.
• A keypad can exchange data only with RF Meters/Hoses that have identification numbers entered into the keypad.
• All RF Meter/Hose addresses and IDs are unique.
• The relationship between a tank and RF Meters/Hoses is 1:n (one tank is assigned to n RF Meter/Hoses).
Due to the relationship between tank and fluid type, an RF Meter/Hose is assigned to only one fluid type.
Creating an RF Meter/Hose
• After a valid RF Meter/Hose address is entered, the Tank-Hose screen displays.
• If the RF Meter/Hose address entered is already used, Hose Address Already Used screen displays.
• Pressing the Enter key with no entry moves to the Delete Hose screen
Create Hose
YES / NO
On the Create Hose screen:
1. Use the Scroll key to move the cursor to select YES.
2. Press Enter to advance to the Hose Prex screen.
Hose Prefix
xx:xx:xx:xx
3. If you need to change the hose prex, press the Backspace key
repeatedly until the cursor is positioned on the rst digit.
4. Type the Hose Prex and press Enter.
Save Prefix?
YES / NO
1. Use the Scroll key to move the cursor to select YES.
2. Press Enter to save the prex and advance to the Hose Address
screen.
Hose Address
-.---.---.---
3. Type the Hose Address and press Enter to advance to the Hose ID
screen.
Hose ID
14_
The Hose ID screen identifies which hose is assigned to the tank and
fluid.
NOT:N Hose ID is the number used to create dispense orders for a
meter by an operator.
Tank-Hose
Tank No 5_
On the Tank-Hose screen:
4. Enter the number corresponding to the tank and hose and press
Enter.
The relationship between tank and RF Meter/Hose is 1:n (one tank is
assigned to n meters). There is a relationship between tank and fluid
type. The RF Meter/Hose is assigned to one fluid type. Assign the
RF Meter/Hose to the tank to which it is connected.
Barcode of the Address
Address
Page 13 August 2012